| Document |
Document Title |
|
JP3618727 |
To make it easier to level treads when constructing a stair outdoors, improve the efficiency of stair construction, and setting smaller for both the tread and riser at the same time instead of only one of them as required, thereby adjust...
|
|
JP2004316158 |
To provide a building material which makes effective use of excellent properties of charcoal to the full extent, is high in strength, and low cost.The building material is formed by mixing crushed charcoal (2) with cement and water, and ...
|
|
JP2004316090 |
To construct a house building with a plurality of stories with excellent habitable performance making the best use of the unique advantage of block construction, at a low cost with good workability while remarkably increasing yield stren...
|
|
JP2004278290 |
To provide a building block which facilitates construction of a high-strength building.The building block 100 comprises an outer cylinder body 101 and three inner cylinder bodies 102 which each have the same length H in an opening direct...
|
|
JP2004276414 |
To solve the following problem: a conventional method for bonding stone to the surface of a concrete block to form a natural stone surface is problematic in load yield strength, and it is difficult to secure complete safety against peeli...
|
|
JP2004278121 |
To facilitate construction by dispensing with bolt fastening and joint width adjustment after fitting a panel frame and a panel inside a frame in mounting the glass block panel, and narrowing the joint width between the frame and the pan...
|
|
JP2004257218 |
To provide a block wall or the like with a landscape effect by forming a block in such a structure as flowers can be planted.In this block for a wall and a flower bed, a partition 2 for maintaining block structure in the block is minimiz...
|
|
JP2004229635 |
To enjoy planting even in a small area of the ground, by solving such a problem that conventional bricks or blocks which are structural members of combined-and-piled type are mainly formed into a similarly-shaped hexahedron, and therefor...
|
|
JP2004232248 |
To arrange a joint bar in an accurate position when binding the joint bar of a reinforcing concrete block to a reinforcement of a building structure, and to prevent the positional dislocation of the joint bar when placing concrete.This j...
|
|
JP2004218416 |
To provide a building block for building a non-mortar self-sustaining wall having substantial stability irrespective of whether there is a conduit inside or not.The building block comprises at least one internal core 42, a secondary or t...
|
|
JP2004218340 |
To provide aggregate for obtaining a surface material depressing increase of the global temperature to the utmost without storing the energy on the surface of the globe to the utmost since it is required that heat is not stored in part (...
|
|
JP2004215653 |
To provide a greening block capable of efficiently greening a vertical surface and practically usable, and to provide a greening block wall.The greening block has side walls 2, 3, an upper wall 4, a lower wall 5, a partition wall 6, a fr...
|
|
JP2004210625 |
To manufacture a wood ash ceramic, at a low cost and in large quantities from an industrial waste, which is an artificial rock close to an igneous rock (acidic rock) substance containing particularly a large amount of SiO2 among environm...
|
|
JP2004211443 |
To provide a transportable mobile built-up foundation for installing a built-up building.The mobile built-up foundation 30 for installing the built-up building comprises a built-up installation base body 31 and a floor body 32 which is p...
|
|
JP2004204636 |
To improve light resistance and durability by reducing its deterioration while being mainly composed of resin foam, having fire resistance and superior heat insulating and sound insulating performances, being easily and quickly construct...
|
|
JP2004204478 |
To provide a glass block allowing the easy detachment and replacement of a glass molding even after the construction of a glass block panel.This glass block is composed of a pair of bottomed open glass moldings facing at mutual open edge...
|
|
JP2004197545 |
To manufacture a brick having a humidity adjusting function with a kieselguhr wall material and mortar concrete.In an urethane rubber or silicone rubber form templated by an aged brick, a toned kieselguhr wall material is cast on the sur...
|
|
JP2004197482 |
To provide a glass block panel which can reduce a manufacturing cost and time from the acceptance of an order to completion, has excellent water sealability, and can be efficiently conveyed to a construction site.This glass block panel w...
|
|
JP2004197476 |
To provide a brick-like building element which is light, air-permeable and used for building an enclosure for a sandbox in a kindergarten or a planter set in an event site or planting trees on a rooftop.This brick-like building element i...
|
|
JP3568002 |
To provide a glass block for an external or internal material or a step for accident prevention by melting a pair of glass moldings with the recesses at the opening edges into one unit and arranging a layer containing light emitting mate...
|
|
JP3565222 |
To provide a greening block capable of efficiently greening a vertical surface and practically usable, and to provide a greening block wall. The greening block has side walls 2, 3, an upper wall 4, a lower wall 5, a partition wall 6, a f...
|
|
JP2004147553 |
To provide a greening block having a fitting structure and connecting voids enabling easily constructing a building having no mortar joint on the outer surface.The greening block has space for holding a medium to grow plants formed in th...
|
|
JP2004143706 |
To provide a glass block wall with an opening/closing function having appearance and characteristics such as a sound insulating property, a heat insulating property, an airtightness and daylighting property almost equivalent to a fixed g...
|
|
JP2004143824 |
To provide a joint sealing auxiliary tool capable of positively sealing a joint while enhancing the efficiency of joint sealing work.An auxiliary tool body 2 of the joint sealing auxiliary tool 1 is provided with an upper face 3 and a pa...
|
|
JP2004141123 |
To provide a self-standing structure having sound-absorbing property as well as water permeability and air permeability necessary for the growth of plant, securing the strength as a self-standing structure as necessary, enabling the cons...
|
|
JP2004132174 |
To provide an improved retaining wall including a module block, and a reinforcement element working with the module block and extended to a soil structure or between particle materials.A stabilizing element 42 used in combination with a ...
|
|
JP2004124634 |
To provide a block for performing efficient laying work and providing the laying pattern of a joint pattern having an excellent design property.Projecting parts 33, 34 are formed by protruding from side faces 15 to 20 of a block body 12 ...
|
|
JP2004124438 |
To provide a wall construction of a built-up house using a log material capable of eliminating a usual deep and large notch from each group of log materials constituting a wall and preventing the incursion of useless wind and rain.The bu...
|
|
JP2004124609 |
To simply and efficiently manufacture a glass worked article formed by welding a metal bar to a glass block.The glass worked article inserts a pipe-like part of the pipe-like metal bar 2 on one end into a mold filled with melted glass 3,...
|
|
JP2004116147 |
To provide a civil engineering and building material excellent in drainage efficiency and cushion efficiency and having interest in terms of architectural design while constituting it of charcoal as main ingredients and a manufacturing m...
|
|
JP2004116195 |
To provide a biodegradable and lightweight building material having a humidity adjusting property, heat insulating property, antibacterial property, electromagnetic shielding property, sound insulating property, and minus ion generating ...
|
|
JP2004100236 |
To provide a method for changing an expandable resin material used for a flame-retardant material which has flame-retardancy, is lightweight, the cost of which is reduced and which abounds in soundproofness and heat insulating properties...
|
|
JP3539921 |
To provide blocks for the external facing of the exterior walls of a dwelling building in which moss is selected as a greening measure for the dwelling building. In the blocks for the external facing of the exterior walls of the dwelling...
|
|
JP3535085 |
To contribute to environmental improvement by providing a culture medium for a plant and the like. A construction element is composed of a pair of corrugated sheet-shaped unit plates 11 and 12 whose front shapes are taken as corrugated o...
|
|
JP2004084441 |
To provide a mortar joint applying implement for piling bricks simply performing brick piling working by everybody, forming mortar joints at regular intervals, and enabling brick piling working of beautiful external appearance.The mortar...
|
|
JP3531932 |
To provide a block for construction making the most of characteristics such as high heat insulating performance and a unique appearance by using a dry plant such as straw, a roof and a wall using the block for construction, and a constru...
|
|
JP2004076307 |
To provide foam hyaline formed mainly of waste glass and sewage sludge burned ash.This foam hyaline is provided by being baked at a temperature of 800 to 900°C by using soda lime waste glass and sewage sludge burned ash as a waste mater...
|
|
JP2004076438 |
To provide a refractory glass block combined body which satisfies the fire-resistive performance of "one-hour fire resistance" defined by the Building Standard Law, even if the combined body has a thickness of about 100 mm that is on the...
|
|
JP3529367 |
To provide a lightweight insulating vegetation block that can be used to create a greening building at the same time to improve the insulation performance of and reduce the weight load to the building. The block body 1 formed with granul...
|
|
JP2004068388 |
To provide a thermal insulation glass block connector and having high thermal insulation performance of a glass block panel and constructed at a site of construction, and the thermal insulation glass block panel.As shown in the figure, n...
|
|
JP2004068386 |
To provide a glass block satisfying the fire resisting performance of "one-hour fire resistance" provided in the Building Standards Act.A pair of glass compacts 2 shaped like bottomed no-lid boxes are sealed and integrated at the mutual ...
|
|
JP2004052259 |
To provide an architectural glass tube causing little scattering of a broken piece of glass even if the glass tube is damaged, making a stain inconspicuous, and causing no impairment of a high-grade feeling originally possessed by the gl...
|
|
JP2004052440 |
To enable low-cost manufacture, and to match a tone of a roof of a dwelling building to that of a block for an exterior.This block 1 for the exterior is formed of a concrete raw material into which a ground tile is mixed. In a block stru...
|
|
JP2004044385 |
To provide a prefabricated building system having earthquake resistance and wind resistance, wherewith components for the building system can be shipped without damaging them and stacked without an additional structure, cargo space in a ...
|
|
JP2004036230 |
To provide a glass block panel and an expansion material therefor, which can enhance waterproofness and into which a waterproof material for forming a waterproof layer can be easily infilled.This glass block panel 60 is composed of a plu...
|
|
JP3517398 |
To provide a decorative plate block which can be used without worrying about the peeling-off of the stone members. On the rear surface of the stone plate 11, two connectors 13 are inserted, and six recessed gutters 11b are provided. On t...
|
|
JP2004019366 |
To provide a lightweight block for construction hardly receiving damage by external force, a deterioration caused by chemicals and other harmful effects from the imposed situation before use.This block for construction is formed to be li...
|
|
JP2004011098 |
To provide a coping which exhibits an appearance full of variety in design and produces a pattern which is larger than ever, for a fence.The coping 1 mounted on the upper portion of the fence 2 is formed by sequentially arranging a plura...
|
|
JP2004001335 |
To provide a water permeable concrete block which is excellent in designability and can easily be manufactured without draining treatment.The water permeable concrete block is formed by feeding a coarse aggregate and kneaded object of a ...
|
|
JP2003340811 |
To manufacture an external facing concrete unit which has tiles arranged accurately at accurate joint intervals while preventing penetration of concrete into joints. The tiles (t) are disposed downward at positioning sections 1a of a pos...
|
