| Document |
Document Title |
|
JP2002159401A |
To provide a charcoal roaster which can close air vents of a gas burner in conjunction with closure of an air supply part which supplies combustion air to charcoal.A charcoal roaster 1 comprises a gas burner 10 which is attached with an ...
|
|
JP2002159402A |
To provide a charcoal roaster which can be hermetically sealed easily and prevent the ashes from flying in the roaster in use, and an air supply structure of it.A charcoal roaster 1 comprises an outer body 2 to be attached to a table and...
|
|
JP2002147761A |
To provide a hot plate for charcoal capable of effecting easy and safe ignition of charcoal in the hot plate and quenching of charcoal in the hot plate.The hot plate 1 for charcoal is provided with an upper cover 5. By placing a cover in...
|
|
JP2002142996A |
To provide a barbecur burner which has a simple structure and is easy to operate and is provided with an up and down position adjustment mechanism for an iron plate or the like.The barbecue burner comprises a push-up lever section 51 whi...
|
|
JP2002130681A |
To develop a hearth made in a floor and an oblong brazier divided into a number of pieces as small as possible so as not to lose a strength and damage character as a furniture and furnishings so as to enable movement and containing there...
|
|
JP2002125863A |
To provide a charcoal roaster capable of easily extinguishing charcoals fire in the roaster, and also provide a fire extinguishing lid.The charcoal roaster 1 is provided with an outer body (2), an inner body (3) provided in the outer bod...
|
|
JP2002115848A |
To provide a portable stove using solid fuel which is light and easy in handling and safe and suitable for stock.The portable stove comprises a fuel containing part 1 to contain solid fuel in a fixed position; and a heat insulation hood ...
|
|
JP3272698B2 |
To thoroughly spread heat to the whole body of a food, simplify the structure, and make the assembly/disassembly possible by arranging an air inlet and a handle protruding port on the peripheral wall of a combustor, forming a heat source...
|
|
JP2002508828A |
Method to operate a combustion device in a house or similar building, with fossil fuel furnaces, such as wood or oil furnaces. Outdoor air is supplied to a heat exchanger that is connected to the smoke tube of the furnace, in such an amo...
|
|
JP2002039629A |
To provide a heat-absorbing flue of firewood, gas, or oil-burning space heater for increasing heating efficiency, contributing generally to conservation of resources and abatement of air pollution, suppressing flue-gas emission, in view ...
|
|
JP2002039628A |
To provide a heat-absorbing flue of firewood, gas, or oil-burning space heater for increasing heating efficiency, contributing generally to conservation of resources and abatement of air pollution caused by flue-gas emission, in view of ...
|
|
JP2002034797A |
To provide a grate capable of minimizing charcoal consumption and a roaster with the same which uses charcoal as a heating source.This grate is provided with a grate body 2 composed of a placement part 3, the optional part of which is fo...
|
|
JP2001314328A |
To provide a cooking pot to be used for both grilled slices of meat and slices of meat in boiling broth capable of supplying sufficient air for a heating source.In a cooking pot (1) provided with a grilled meat cooking part (2) for cooki...
|
|
JP2001521131A |
A heat insulation wall has two outer surface layers disposed at a distance from one another; the outer surface layers have a contour and are at least substantially vacuum-tight. The heat insulation wall has a connecting profile which ext...
|
|
JP2001521127A |
A heat-insulated wall has two outer covering layers which are disposed at a distance from one another and are constructed at least substantially vacuum-tight. The two outer covering layers are connected to one another in a vacuum-tight m...
|
|
JP2001521128A |
A heat-insulated wall is formed of two covering layers configured to be substantially vacuum-tight and are disposed at a distance from one another. The two covering layers are connected to one another by a connecting profile that runs al...
|
|
JP2001521126A |
A thermally insulated housing has a substantially vacuum-tight outer shell and an at least substantially vacuum-tight inner enclosure that is spaced apart from the outer shell. The elements are connected to one another in a vacuum-tight ...
|
|
JP2001521130A |
The heat insulation wall is a sandwich formed by two outer, at least substantially vacuum-tight, spaced-apart surface layers and a thermal insulation in between. The outer surface layers are connected to one another in vacuum-tight fashi...
|
|
JP2001304507A |
To provide a combustion device for a large kettle, which remarkably raises combustion efficiency in respect of the large kettle and does not involve a danger when used. The combustion device for a large kettle consists of an outer periph...
|
|
JP2001304553A |
To provide an epoch making cooking heater having a quite new structure capable of keeping such a temperature as one enabling a meat to be cooked in a delicious and fast manner, preventing either oil or meat dew from being dripped onto a ...
|
|
JP2001304554A |
To provide an epoch making cooking heater having a quite new structure capable of keeping such a temperature as one enabling a meat to be cooked in a delicious and fast manner, preventing either oil or meat dew from being dripped onto a ...
|
|
JP2001292916A |
To provide a barbecue grill that has an igniting implement for easy ignition of charcoal and the like, permits easy and instantaneous transfer, for use, of the ignited charcoal and the like onto a grill body, and is collapsible into a co...
|
|
JP2001289443A |
To provide a mess-kit cooking range which can cook rice even in a tent in an emergency where firewood is not available or in rainy weather. The mess-kit cooking range using solic fuel is formed by forming a metal plate such that it compl...
|
|
JP2001272026A |
To provide a forced flue type solid fuel burning space heater which can be used conveniently in a highly airtight and highly heat insulating house (chimneyless house) at the same convenience as that obtained when a forced flue type oil b...
|
|
JP2001248843A |
To provide a heating implement capable of heating a food of different type such as one-pot dish, grilled meal or the like by one heating implement by an optimum heat source, by combining a charcoal fire or a charcoal fire cooking applian...
|
|
JP2001241665A |
To provide a combustion equipment capable of being used in a home or outdoor, using not only a lumped charcoal but also a small lumped charcoal or a carbonized bamboo as a fuel and being used as for cooking continuously for a long time b...
|
|
JP2001241664A |
To provide a charcoal fire regulating and substitute material contributing to a regulation of a charcoal fire and an effective use of a thermal energy of the charcoal fire to be wastefully dissipated.A cavity 2 is axially provided in a c...
|
|
JP2001227746A |
To provide a stove which can be extensively utilized, by combination of simple parts, as (1) a dust incinerator, (2) heater, (3) cooking stove, (4) charcoal manufacturing equipment, (5) smoked food manufacturing equipment or the like.The...
|
|
JP2001186991A |
To provide a barbecue grill capable of easily filling fuel, adjusting a position, and easily adjusting a heating power. A fuel filling port 4, an opening and closing door 5 for opening and closing the fuel filling port (4), and a stopper...
|
|
JP2001137128A |
To provide a meat roaster and a method of roasting meat which can roast meat to get non-greasy taste containing the increase of calories without burning them locally, prevents the generation of fume and bad smell, needs no expensive capi...
|
|
JP3159964B2 |
To provide a portable cooking stove which has a sufficient heat insulating effect and is improved in mass productivity at a low cost. This portable cooking stove is composed of an outer body 1 and an inner body 2 arranged in this outer b...
|
|
JP2001078898A |
To enable even a person who is not skilled in a way how cooking by charcoal fire to well carry out charcoal fire cooking by making it possible to automatically maintain a cooking temperature at a desired temperature simply by putting the...
|
|
JP2001065867A |
To permit the stabilized supply of a sufficient amount of air (oxygen) at all times and burn solid fuel completely without generating uncomfortable smell while cooking various kinds of food quickly and surely by enhancing heating power. ...
|
|
JP2001046235A |
To rapidly and surely cook foods by allowing always a stable supply of a sufficient amount of air (oxygen), by conducting complete combustion of solid fuels without production of an unpleasant odor, and by making the thermal power strong...
|
|
JP2001041455A |
To obtain a portable convenient outdoor cooking stove which can be collapsed compactly. Two side plates 1 are stood continuously while integrating a cover plate 2 and two legs 3 at the lower part integrally wherein an O-slit 4 is made at...
|
|
JP3135191B2 |
PURPOSE: To stabilize temperature in a green house, such as a house for cultivating fruits, for a long time and to produce a necessary minimum limit heating effect by a method wherein an infinite number of through-holes are formed in an ...
|
|
JP2001004139A |
To provide a fireplace apparatus also serving as a foot warmer and its mounting structure capable of hearing a lower half body and hence comfortably taking foods even upon the use of the fireplace in order to eat grilled meat for example...
|
|
JP2000356346A |
To provide not only extremely easy ignition property but also excellent portability.A backing wire 2 in a shape approximately in contact with the inside of a package box 1, a given amount of BINCHO charcoal 3 for fuel, a given amount of ...
|
|
JP2000337636A |
To reduce the number of appliances of which a combustor consists and to make the combustor portable.A casing 20 is formed such that a support part 25 to support an upper flange 35 of a pot body 30 is peripherally situated at an intermedi...
|
|
JP2000329349A |
To reduce the number of apparatuses constituting a combustor and, at the same time, to make the combustor portable. The casing 20 of a combustor 1 has a circumferential receiving section 25 which receives the upper flange 35 of a pot bod...
|
|
JP2000329348A |
To provide a charcoal fire grilling apparatus for home use that can make charcoal fire cooking homely, simple, and daily. Bincho charcoal 12 with a length of approximately 15-18 cm and a diameter of approximately 4 cm is installed at a b...
|
|
JP2000283463A |
To prevent fat and water content oozing out from cooking food material from dropping to a charcoal burning chamber and ash from being whirled up. Charcoal burning chambers 312, 313 are provided outside of a region where fats and water oo...
|
|
JP2000257863A |
To provide a movable hearth underside device in which a pot body can be more emphasized, the hearth underside device can be externally recognized with ease, the atmosphere of a fireside can be more brought out and the inner part of the p...
|
|
JP2000257844A |
To provide a smoke exhaust apparatus wherein exhaust smoke produced from a combustion portion can be rapidly exhausted, air conditioning in a room is prevented from being deteriorated to improve comfortableness of the use, and a movable ...
|
|
JP3070798U |
[Task] The present invention is to effectively isolate the high temperature generated around the charcoal box of the grilled meat stove from the outside world, thereby achieving the purpose of safety protection. [Constitution] The presen...
|
|
JP2000220830A |
To provide a cooking utensil in which charcoal fire can be utilized easily on a gas cooking stove, or the like, and a production method of charcoal for dedicated use. Charcoal 3 is placed in an iron plate container 1 mounting a metal mes...
|
|
JP2000193245A |
To reduce the heat radiation from charcoal to the periphery to a sufficiently small value even when the charcoal has a high combustion temperature by providing a water tank above a furnace chamber surrounded by a wall body, and filling u...
|
|
JP2000184967A |
To provide a smokeless meat grilling cookstove using charcoal which can effectively prevent a charcoal distinguishing phenomenon caused by the forced exhaust of air for eliminating smoke without using an air-forced feeding system, etc. T...
|
|
JP2000186817A |
To provide a stove having excellent economy as compared with other stove using fuel such as petroleum, gas or the like, warming by utilizing hull to be desired to be incinerated, further capable of continuously burning for a long time, e...
|
|
JP2000171039A |
To obtain a portable hearth capable of being simply installed and usable without cutting out a floor.The portable hearth comprises a hearth body 1 made of wood and provided with a bottom plate 12 at a lower end of a square cylindrical bo...
|
