Login| Sign Up| Help| Contact|

Patent Searching and Data


Matches 401 - 450 out of 10,904

Document Document Title
JP2006208646A
To provide a photographic film unit capable of obtaining a good three-dimensional image or switchable image free of degradation in image quality by simple device configuration.The photographic film unit 30 has a surface to be exposed and...  
JP3802961B2
To provide a shutter device capable of preventing the infiltration of sand. The engaging shaft 41 of a sector 40 is exposed from an aperture 28c provided on a cover plate 28, and pivotally supported freely turnably between a base plate 2...  
JP2006195484A
To provide an instant film pack excellent in recyclability and in the planarity and dischargeability of instant film units, and also to provide a camera.A light shielding member which blocks openings 57, 58 in a rear cover 53 constitutin...  
JP3802404B2
To realize excellent soft focus photography even in the case of a simple photographic lens. The photographic lens of f32 mm is used and a focal position is set to 6 m. When a subject distance is set to about 3 m and release operation is ...  
JP3802470B2
To surely prevent the incidence of external light on films within a sheet film pack from the clearance between a pull cap and a sliding contact surface of the pack body of the sheet film pack. A V-shaped groove 30 is formed at the pack b...  
JP3799687B2
To prevent a deterioration in image quality caused by the degradation of a development processing solution due to the fact that a development processing quantity is small because of the connection of only one image processor by providing...  
JP2006184432A
To provide a film unit having a lens ensuring water proof performance and dust preventing performance in a simple and inexpensive configuration, and facilitating taking out a film in a laboratory.The film unit with lens, preliminarily lo...  
JP3796965B2
To prevent the erroneous setting and the vertical format arrangement of a roll photosensitive material housing container to the utmost and to prevent a user from being troubled by providing a recessed part and/or a projecting part on one...  
JP3796055B2
To provide an instant film pack and a camera excellent in the properness of recycling, and the flatness and the ejection of an instant film unit. A light shielding member covering the apertures 57 and 58 of a back cover 53 constituting t...  
JP3797042B2
To provide a package, where a detention hole of light-shielding moistureproof bag and a sheet-like photosensitive film have a prescribed positional relation so that the restraining hole of the light-shielding moistureproof bag can be sur...  
JP2006178500A
To provide a solvent coating system heat developable photosensitive material which suppresses the variation of gradation in raw stock preservation, has high contrast when used for making a printing plate, and hardly develops curl even in...  
JP2006178499A
To provide a solvent coating system heat developable photosensitive material which suppresses the variation of gradation in raw stock preservation, has high contrast when used for making a printing plate, and hardly develops curl even in...  
JP2006178341A
To provide a cartridge for a photosensitive recording medium, where even if the cartridge is invertedly loaded, lock of the shutter can be canceled by a common lock-canceling mechanism.The cartridge 2 comprises a cartridge body 25 for ho...  
JP3793358B2
To automatically and easily insert a regular-sized film having different length, and also to simplify the constitution. The cutting and inserting device is provided with a cutting mechanism 92 for cutting a long film F, 1st and 2nd feedi...  
JP3792407B2
To prevent faulty ejection caused by the deformation of an instant film unit and the faulty development of a developer. Length F from the trailing end of a film unit 29 at an initial position where the unit 29 is housed in a case 43 to t...  
JP2006171417A
To provide a photographic package which makes it possible for an orderer to check the charge for at least photographic prints of one order and the contents of the photographic prints of one order without breaking a seal, and to provide a...  
JP2006154472A
To easily separate piled large packaging materials for sheetlike photosensitive materials from each other without emitting sparks when an operation for packaging sheetlike photosensitive materials is performed by transversely feeding the...  
JP2006154683A
To provide an electrochromic element suitable as a dimming filter, an optical element comprising the above element and an electromotive force generating element, and an imaging unit having the optical element.An electrochromic element is...  
JP2006145723A
To provide an electrochromic element high in light transmissivety.The electrochromic element includes a cathode, an anode and a charge transfer material, and indicates a coloring state and a discoloring state. One or more kinds of electr...  
JP3781526B2
To make it possible to efficiently obtain a high-quality package by properly executing the inspection as to the presence or absence of defects during various kinds of fabrication work to produce the package from film rolls. This method i...  
JP3781533B2
To easily and rapidly discard the defect part of photographic sensitive film associated with the abnormality of an equipment. When the abnormality arises in the equipment of a film working and packaging system 10, a film working controll...  
JP3781521B2
To eliminate unwanted processing due to the transportation of various kinds of defective articles to a next process, to efficiently obtain a high-quality packed product and to reduce the generation rate of a defect in a packed product by...  
JP3781328B2
To release fixing of a hold lever with a lid shutting member to surely shut a shading lid of a film cartridge by swinging the hold lever so that holding of the lid shutting member is not released. When all frames are exposed, a user wind...  
JP3778530B2
To enable a user to reduce the load of film winding-up operation. Between a winding-up knob 10 and a rotary shaft 42 engaged with the spool 20 of a cartridge main body 18, a driven gear 51 integrally arranged with the shaft 42, an intern...  
JP3778408B2
To prevent the ghost or flare caused by the internal reflection of a harmful light and further substantially prevent the reduction in peripheral light quantity by setting the field angle of photographic light extending from a photographi...  
JP3778532B2
To stick label at a high speed with high accuracy. When a unit body 18 is detected by a photoelectric sensor 58, the release paper 24 of a label delivery head 14 is taken up for a specified length and the label 12 is delivered in an X di...  
JP3777057B2
To attain low cost and provide suitability for incineration and recycling, as well as to ensure various characteristics necessary as a packing material for a photosensitive material by using only a polyolefin resin-base film layer. The p...  
JP2006126416A
To provide a tray which prevents scratch due to vibration in a transport process, handling, etc., and reduces the number of sheets stacked, without altering the shape of the tray (altering a photographic device), and to provide a sheet-l...  
JP2006126685A
To provide a rolled photosensitive material which can be efficiently loaded into a paper magazine in a bright room.In the rolled photosensitive material obtained by attaching a beltlike shading member broader than a long photosensitive m...  
JP2006126769A
To prevent photographing in the selected state of a wrong photography mode and to recognize that photographing is performed with the prescribed photography mode.The front face of a lens-fitted film unit 2 includes a taking lens 5, a view...  
JP3775882B2
To provide a packaging body for roll-type silver halide photosensitive material which prevents deterioration of the roll-shaped silver halide photosensitive material due to abnormal sensitization. This packaging body is composed of a rol...  
JP2006116927A
To provide an X-ray photograph bag having a scale which does not require a ruler, and can accurately measure the form.The scale of an actual size or a specified contraction is provided by printing along the edges of this X-ray photograph...  
JP3773142B2
To accurately form a film roll housed in the film housing chamber of a film unit with a lens in a short time. This film roll is constituted of the two processes of a film leading end feeding process for feeding a photographic film from a...  
JP3773186B2
To deter or prevent an electronic flash unit from improperly being diverted. A film system 9 with a lens comprises a film unit (film unit) 10 with a lens and an electronic flash unit 11 which is detachably fitted to the film unit 10. The...  
JP3773150B2
To reduce production costs and simultaneously, facility space required for a trigger armature attaching process, for effectively making use of manufacturing facilities by simplifying the trigger armature attaching process and reducing an...  
JP2006111285A
To provide an easy-unsealable packaging material having high barrier properties.The packaging material is composed of a laminated film having at least a base material layer, a barrier layer, and a heat adhesive resin layer. The packaging...  
JP3771857B2
To provide a light shielding rolled photosensitive material package which prevents occurrence of defects such as pressure fog and printing blur and is excellent in disposability after use. The light shielding rolled photosensitive materi...  
JP3770418B2
To enhance the reliability of a film winding lock mechanism. An exposure unit 22 is fitted to a main body base part 20 provided with a cartridge housing chamber 27 housing a cartridge. When the winding-up of one frame of a film is finish...  
JP3770419B2
To prevent the occurrence of a shutter release non-actuation state caused by the deflection of an outer cover made of resin and to prevent the non-actuation of a light shielding cover closing mechanism. A supporting plate 46 supporting a...  
JP3767247B2
To obtain a film unit with lens which is always being switched to an exposing condition adaptable to high luminance high in use frequency when photographing is newly started. This film unit with lens is equipped with a moving member movi...  
JP2006098714A
To provide a paper magazine capable of reliably winding paper on a winding stem even if both sides of an end of the paper warp toward the winding stem owing to causes such as curl.In at least positions of a winding stem 333A-333G corresp...  
JP2006098769A
To provide a camera constituted so that the power source of a photometry circuit can be surely turned on before a photographing mode is switched, and also, the power source can be turned off after a lapse of prescribed time.The power swi...  
JP2006098768A
To provide a film unit with lens capable of always performing photographing in a proper photographing mode by preventing the forgetfulness of changeover of a photographing mode.When a mode changeover knob 8 is returned to a neutral posit...  
JP3766308B2
To provide a camera and an image forming system by which a high- quality image is formed by easily correcting the deterioration of image quality caused by a lens in the case of photographing by the use of a camera without having the enor...  
JP3766528B2
To form a printed photograph having a different color tone such as a colored, black-and-white or sepia photograph from photographic film and to improve workability in developing processing. This film unit with a lens is provided with a l...  
JP3766552B2
To prevent a data imprinting device and a film unit with a lens and the built-in data printing device from being illegally reused, and to improve the collecting ratio of the device and the film unit. A data module 20 is arranged behind t...  
JP3766522B2
To provide the efficient and inexpensive packing method of a film unit with a lens corresponding to the production of many kinds in small quantities. The front surface side of the film unit with a lens 2 is covered with a spacer sheet 20...  
JP3766521B2
To provide the packing method of a film unit with lens which efficiently and inexpensively corresponds to the production of many kinds and in small quantity without deteriorating humidity proof performance. A transparent part 30 is forme...  
JP3766537B2
To form various kinds of photographic prints from a photographic film, and also, to enhance a workability of developing. An operation knob for selecting a pseudo telephoto magnification is installed on the film unit equipped with a lens,...  
JP2006091577A
To prevent a user from forgetting to change over a photographing mode in a lens-fitted photo film unit, so that the user can take a photograph in a proper photographing mode at all times.When the lens-fitted photo film unit is set to a d...  

Matches 401 - 450 out of 10,904