Technological Area:

This invention is related with anti-coronavirus footwear minimizing contamination of harmful microorganisms in submicron scale and that can be used at shoes, socks, babette, slippers and another footwear.

State Of The Art:

Static electricity which has been known for centuries, is obtained naturally and it is an area which is thought even in primary school and high school courses and which is well-known and used at most. Static electricity is transformation of a part of energy loss in friction of two the same or separate object to heat and the other part to electric energy. If friction objects have dielectric characteristics, arisen voltage is piled on that object and it is accumulated since it cannot go anywhere else. As we know from lighting and lightning flash examples, accumulation can reach up to billions of voltages. We can realize that a load is formed when a lightning flash is seen, only after it is exploded. Whereas, Benjamin Franklin, with his kite experiment demonstrated that an electric accumulation is formed there seconds before explosion moment. Though, people who do not completely understand the subject, lost their lives by holding copper wires by hand when they wanted to repeated the experiment. The subject was realized with a copper wire up to a point close to the ground and then a non-conductor silk thread at its continuance.

We encounter with static electricity in every stage of our daily lives and we understand that situation with accumulation of a load as much as hurting us. For instance, electric shock of two persons who want to shake hand or electric shock while opening a door are events those, we all encounter. Crunching sound arising when we take off an acrylic fiber pullover in darkness, and bumps are facts we know. Human body acts as a capacitor due to its volume and stores static electricity as much as its capacitive value. Hence, fatter persons can store higher voltage. The more objects get smaller, the more voltage, electricity amount and storage capacities reduce. According to an experiment for static electricity taken from Wikipedia, a human walking on a vinyl ground only for 6 meters, can be charged with 20000-volt electricity (at 15% relative humidity), whereas the same person can be charged with 1000 volt under the same conditions but on 85% relative humidity. In that case, instead of vinyl ground, having only vinyl shoes does not change the result. Van de Graff generator and Tesla transformer are the devices those can industrially produce static electricity. While Van de Graff device operates completely with friction energy, Tesla transformer utilizes mains voltage. Rumkorf coil ensuring ignition of spark plug in automobiles, uses linear flow of accumulator.

One of the most important characteristics of static electricity and static voltage, is to create attractive force on mass and it is briefly demonstrated with F= (Q2xQl)/D formula. In that case, F= Force, Ql=Load of towing material in terms of volt, Q2=Negative load of an object being towed, D= Distance in between. In that case, if Q2=Q1=O (zero), it means no force will be arisen. On the contrary, if one of these values is positive and the other one is negative, force of static electricity will increase. The distance is linear and the more it decreases, the more force of increases. In general, the ground load is accepted as 0 (zero). If a blown-up balloon is slightly rubbed by hand and touched to a wall, we observe that that balloon is sticked on that wall in spite of gravity. Another simple example; when we open a kitchen plastic wrap from its coil, we know that it is pulled by everything close to it, even it tends to be wrapped on our hands, these examples demonstrate how force of gravity of static electricity is strong and effective. Followings are some of practical works performed by having benefit from force of gravity; Wagner powder paint gun is a paint gun blowing (+) loaded polymer powder particles towards a conductive material to be painted and loaded with (-) load.

Since powder particles that stick on a material to be painted with static load, are conductive, a powder particle that sticks on a point, pushes and prevents a second particle to be on it and other powder particle must find another empty place for itself and thanks to this, painting becomes highly smooth and homogeneous and it is known as static painting (oven drying), all of paint particule to be used is drawn by a material to be painted, and sticks on everywhere including external surface. Basic principles of this process are force of gravity of static electricity. Another example is textile application that is named as flock velvet. The textile to be covered in that example, is passed through an electricity conductive adhesive and colored polyamide fibers that are loaded by positive electricity, are sprayed. All the more amazing, all these fibers are slided into vertically as needles since their ends are more loaded and they are slided into fabric homogeneously without leaving any gap. Binder is dried with following firing and velvet with perfect appearance is obtained. With this method, various materials such as solid parts can be coated. Laser printers are another application of static electricity. Except these examples, the most interested ones for us are scientifically understanding physical behaviors of particles in coronavirus diameter which are microscopic and smaller particles, such as cigarette smoke and that developments those are getting complicated gradually and hence frightening us, are simple and understandable when we consider the subject from this perspective. When the subject is understood scientifically, complication is removed and solutions are reached easily. A filter device which is used in the technic now, has nothing to do with a filter in terms of operating principle. However, it is Cottrell device ensuring to keep the best ultra microscopic particles and to separate them from the air. Even cigarette smoke that cannot be cleaned by any filter, can be cleaned with this system. Cottrell device is a pipe made of metal and a metal wire extending alongside a pipe from the center. Negative end is connected from a transformer ensuring a high voltage for the pipe. Positive end of generator is connected to the wire in the middle. When the air consisting smoke or powder particles in colloid level, is passed through that place, it is seen that the air is cleaned completely. When powder particles are loaded with positive loads from center electrode, it quickly moves to metal cylinder that we can call chimney, and it sticks on the wall and remains there. Thanks to this, sub-micron particles are very quickly and effectively removed from the air.

There is a close relation between electrostatic and coronavirus that takes an important role in pandemics today. Based on what we know about coronavirus, its diameter is approximately 1 nm, it has a RNA chemical molecule where it has an extensions on its external boundary and its spheric external shell is formed by fat. When we examine what we know based on this definition with a chemical approach; it can be considered that its external membrane should be at the highest carbon number C=17-32, it should not be in double bond(saturated) form to be in solid form, it is a triglyceride ester which is a fatty acid in triglyceride form. In this case, melting point of a fatty acid ester should be minimum 57 C°. Since saturated fatty acid chain with aliphatic character, has a highly stable chemical structure, it has a stable structure resistant to chemical reactions. RNA molecule which is protected by such a durable fat film, can be stable forever under a good protection. RNA cannot be killed since it is not alive. When we consider that structure as a plant seed, it will protect itself from natural conditions until it finds a suitable environment for becoming green. However, hen this solid fat film contacts with another liquid oil (consisting double bond), it can be corroded by liquid oil. In brief, thanks to this, a liquid fat, for instance an oil such as Sunflower oil, can corrode the virus. Any kind of substance those have solvent effect for fat, can be used for this purpose. Also, surface-active substances with HLB (hydrophilic lyophilic balance) between 8-15, corrode that film easily, so that it also supports recommended water-soap usage. When we examine what we know in terms of physics; Coronavirus can reproduce in all types of human cell, but the most important organ is lungs in terms of infection mechanism, likewise, even though a diseased liver or nervous system is not in contact with external environment, lungs have a highly big surface area. Due to its consistently humid, wet and adhesive nature and having in direct contact with external environment, it ensures to have a good feeding environment for mixing new viruses those arise from diseased tissues that are multiplied easily and to inject the disease easily. Each breathe we take, is distributed to an incredible surface area at lungs and it goes out by completely contacting with tissue. Meanwhile, regardless its relative humidity rate, this relative humidity rate increases highly when it goes out, even up to double in seconds. Breathing upon a mirror or seeing vapor of breath in winter can be given as examples for this situation. This situation demonstrates that lungs are losing water consistently and this lost vapor serves as a carrier for viruses. A person who is infected with a virus, increases its body temperature as natural protection system and this increased temperature accelerates vaporization. Accelerated vaporization passes from lungs by using distillation method with water vapor of sensitive essential fats well- known in chemistry, meaning passes to gas phase from water phase. Since also throat wall is also loaded with the same electricity load, it goes out by using exactly middle point of throat. Namely, it ensures to move viruses to atmosphere without need for coughing or sneeze of diseased person. When diameter of droplets forming with coughing, is 0,2 mm, spreading distance cannot exceed 2 meters due to gravity. In case of an equal level and high relative humidity, if diseased person is placed above, this distance becomes more and less in a contrary situation. Simply, coughing of children is less risky than adults. As WHO accepted, the virus can spread in the air to distances beyond calculations. However, the good part of this situation is that it loses its concentration as much as square meter of distance during spreading to distances. Description up to now, is based on simple physic laws. However, the mystery of the subject is that the other three laws of physic are involved. The first one of that the more grain size of sub-micron particles get smaller, it gets into effect of electrostatic forces by getting rid of gravity. The second one is that all moving objects are under effect of friction forces, all objects being subjected to friction produce electrostatic voltage. The third one is relative humidity. The more relative humidity is high, the more these particles cannot be dried and they fall on the ground, besides electrostatic loads have less values. If it is a contrary situation, these droplets get smaller by vaporizing immediately and meanwhile, static electricity reaches higher values and vaporization event increases exponentially. From that point, we should understand that moving people produce electrostatic load. This load is formed with friction of shoes on the ground or friction of synthetic clothes those are worn one above other. It is also required to add relative humidity of the air as a factor increasing or decreasing formation. The more relative humidity of the air is high, the less electricity is formed. In a relative humidity close to dryness, produced voltage is very high. This formed voltage can be positive or negative based on composition of clothes of persons. Bottom structure of shoes being worn, meaning its part contacting with the ground, increases, decreases or resets value of this electric load.

This high voltage formed in a body, is localized especially at head section (spheric) and nose region becomes a place consisting the most electricity (its radius is very smaller than radius of head). It easily absorbs power from the air with hair and collects. Namely, it cleans atmosphere. The more a human body is big, the more it can store higher voltage capacitively, for instance; fatter persons. On the other hand, the more body gets smaller, the more loading potential gets less, for instance; children. If we count criteria against us: Thick footbed shoes with polyurethane base, PVC footbed, plastic sole shoes take place in the first three rows. Leather based shoes (sole leather) are the safest ones by transferring all electric load to the ground. Naturally, bare foot cannot be discussed and it is the best.

About clothes, the most reliable one is single layer cotton or viscose ones. These fibers consist of 12% humidity naturally and they do not produce static electricity. The scariest ones are mainly acrylic fiber, polyester and polyamide fibers and materials with poly prefix and the worse, to wear them one above another. Especially the ones those are recently washed and well dried, can produce more electric load. All 20 nurses who wore clothes made by bin bags for protesting purposes, were infected with the virus. Since they could not consider that bin bags are made by polyethylene and it can increase electric load up to 3000-10000 volt in human body in case of action. Such high voltage is accumulated completely on body if hospital floor is coated by epoxy or a polymer such as PVC or if they wear a pair of polyurethane comfortable shoes and it becomes a perform attraction area for the virus. The subject in this case is that all types of particles in the air are drawn by electricity on polyethylene covers. Drawn particles are loaded with current load and pushed back quickly, but they are loaded already. However, when it contacts with saliva at mouth or nose, it sticks and remains there. During that process, no virus is wasted and they reach their targets by repeating this circle for hundreds of times.

Masks: In the tests that we performed, weight of a simple cellulose mask that is used by wearing on mouth just for three minutes, increased 0,012 gr. This amount was formed by keeping humidity exiting from mouth. When we proportion with the area where mouth and nose are placed as the main function area, we see that the area get humid as much as conducting static electricity. On the contrary, if there was not such a situation, it means that the gap between tissue pores of that mask, is small as much as 1000 viruses can pass through that gap or with a backwardly expression, pores are such big that there is no meaning to use a mask. Besides, in the beginning, thesis of scientists claiming that masks are useless, was sourced from that point. However, they could not see static electricity and different of humid mask. Likewise, they believed that it is useless by performing that test with the machines making absorption to a single direction in laboratory environment. For this reason, masks that are made by cotton or cellulose fiber, make filtering both from inside to outside and from outside to inside. When a breath is given from inside to outside, high humid air coming from lungs causes humidity of a mask and either destroys accumulated static electricity or the viruses those stick on that humidity due to wetness around mouth, had to be blocked.

In patent application numbered US2014254059A1, “Electrostatic Discharge Shoe Assembly And Electrostatic Discharge Shoe Grounding Accessory Thereof’ was expressed. An electrostatic discharge shoe grounding accessory comprises an attachment mechanism and a fastening mechanism, wherein, the attachment mechanism is a U-shape holder attached to the back wall of an opening rim of the shoe, and the fastening mechanism includes at least one smaller loop through which a front portion of the shoe is hitched. An electrostatic discharge shoe assembly comprises a shoe and the electrostatic discharge shoe grounding accessory.

In utility model application numbered CN205250478U, “Electrostatic Protection Shoes” is expressed. The utility model provides an electrostatic protection shoes, but includes the shoes body, sole electric conductor, wire, electron protective component, and wherein electron protective component's constitution component is generally as follows mainly like gas discharge tube, resistance or piezo-resistor, diode or restrain diode, inductance and chip integrated circuit etc. The utility model discloses innovation point lies in that static has passed through electronics protective component's slowly-releasing to ground releasing through electrostatic protection shoes occasionally, harm that the appearance of having avoided instantaneous excessive pressure surge probably led to the fact the electronic equipment of human body and people's physical contact, the electrostatic protection shoes who also protects the current -voltage who has harm to the human body among human external harmful workshop operational environment and life operational environment like the static electrification. In addition, that electrostatic discharge method is different in above mentioned inventions, the parts ensuring that function are costly.

As a result, there is a need for a new technology that can overcome disadvantages mentioned above, that is flexible, low costly, suitable for serial production, with electrostatic load discharging capacity, that decreased contamination effect of coronavirus.

Definition of the invention:

This invention is a new technology that can overcome disadvantages mentioned above, that is flexible, low costly, suitable for serial production, with electrostatic load discharging capacity, that decreased contamination effect of coronavirus.

This invention has been prepared with the purpose of preventing pandemics named as Covid 19 as a negative result of decreased natural protection of human body as a result of decreasing natural protection gradually by moving away from natural resources more and increasing use of more modern and synthetic materials into human life in the last century in all areas of our lives. Its aim is to ensure continuance of our lives safer with small additions without changing our current life standards. This invention is based on basis physic rules, it naturally becomes a subject of medicine after being sick.

Inconsistencies encounter in the invention, can be very simplified when 4-5 rules of physics are taken into consideration. These are; microscopic particle physic, static electricity formation and static electricity force of gravity law. It forms as loading static electricity to a distance particle with induction and pulling it to itself, pushing to contrary direction fiercely in case of contact, increasing static electricity to very high voltage values with a very few energy, when capacitive values get bigger, meaning they get bigger in terms of volume, increasing electricity amount that can be stored, meaning, that bigger bodies increase higher voltages, accumulation of static electricity more on edged surfaces, for instance nose area, increasing and decreasing static electricity based on humidity of the air. A particle loaded with static electricity can be pulled by an object with neutral or adverse load and the most interestingly, pulled particle can be sticked immediately on a wet point in case of contact and it cannot be pushed back. For instance; microscopic particles (viruses) on an object loaded with static electricity (lungs of a diseased person in this case) can be spread around fiercely. Gravity is a force that can be neglected in very small particles. Based on this information, our invention has been developed; it can be used not only at shoes but also at footwear such as sandals, boots, socks, etc. Basic purpose of our invention is to discharge static electricity accumulated on a body to the ground with a thread made by a carbon fiber material, and to destroy attracting bacteria, virus or other harmful microorganisms by body. Because a person loaded with electrostatic load, will attract a virus quickly if that person carries an adverse load. In this context, with our invention, discharging load on a body will be ensured and it will be neutral.

Since the parts forming the invention can be fixed with each other easily, it is dried easily, and since assembly time is short, its cost is also low. Besides, the invention has a durable structure.

Explanation of figures:

The invention will be explained by presenting reference to the figures in attachment, hence, characteristics of the invention will be understood more clearly and it will be appreciated, however, it does not aim to limit the invention with specific arrangements. On the contrary, it is aimed to cover all alternatives of the invention that can be included into its area where it is defined, all amendments and equivalences. It should be understood that the details are demonstrated only for the purpose of expressing preferred arrangements of the current invention and to shape both methods and to ensure the most useful and easily understandable definition of rules of the invention and its conceptual characteristics. In these figures;

Figure 1 It is schematic view of mechanism of Experiment 1.

Figure 2 It is schematic view of mechanism of Experiment 2.

Figure 3 It is schematic view of mechanism of Experiment 5. Figure 4 It is schematic view of mechanism of Experiment 6.

Figure 5 It is view of threads in internal part of the shoes from above.

Figure 6 It is view of threads in footbed part of the shoes from below.

Figure 7 It is schematic view demonstrating operating type of the system.

Figure 8 It is side view of an alternative structuring of the invention.

The figures those will assist to understand the invention have been numbered as indicated in the attached picture, their names have been given below.

Explanation of References:

1. Shoes

2. Thread

3. Footbed

4. Carbon Fiber Material

10. Glass Sheet

20. Wet Paper Strips or Aluminum Folios

30. The Plate similar to Release Button which has a hole in the middle

40. Spraying Nozzle

50. Hose

60. Juncture

70. Lamp

80. Cable connected to Nozzle

90. Cable with Pliers at its end

100. Cable with alligator mouth cutter at its end

110. Velvet Fabric Coating Transformer

120. Printer

130. First Wet Paper

140. Second Wet Paper

150. Third Wet Paper

160. Transparent Chest Cube

170. Chassis Connection Cable 180. Ink Particles

P. Positive End

N. Negative End

T. Grounding End

C. Wet Cotton

S. Safety Resistance

300. Taking static electricity

301. Conducting static electricity

302. Discharging static electricity

Detailed Explanation of the Invention:

Before developing the subject of the invention, various experimental works have been done. These will be explained below in detail.

Experiment 1: Electroscope (Figure-1)

A strip has been cut from an aluminum folio that is used in kitchens, in approximately 1 cm width and 10 cm length as demonstrated at Figure- 1. Later on, by folding from its length, 2 triangles were cut from its closed side with scissors and were taken out. That part that is hung on a copper wire at 2 mm thickness that was bent in L letter shape, was placed on a transparent pvc bottle. The tool has been prepared with the purpose of providing opinion about electro static load and it passed all tests with success.

Experiment 2: Electroscope that was made conductive with a carbon fiber (Figure- 2)

2 aluminum folio sheets in 2cm xlcm dimensions that were cut from kitchen aluminum, has been adhered on 4cm distance from each other on 2 corners with a carbon fiber. These two plates that have been hung on a holder made by a copper wire, move away from each other fiercely when static electricity is applied on that copper wire. The carbon fiber which is another version of electroscope that is used in Turkey, has been provided by Aksa acrylic industry (DowAksa®) Yalova company. The fiber wire which has 3 denier characteristics, conducts electricity perfect. 3 denier = 3 kilometers, means 1 gr. The main base of our invention is based on that the carbon fiber conducts static electricity perfect. A carbon fiber, with its flexibility and durability, is durable against metal fatigue and breaking that are seen mainly at metals.

Experiment 3: Movement of the Objects with Static Electricity

The experiment has been started by placing a ball made by polystyrene in 1.32 g weight and 4 cm diameter, a ruler made by polycarbonate in 10 cm x 35 cm dimensions (ceiling coating materials in 4 mm and with a single room, has been provided from uhadaroglu®/Kagithane) and a microfiber fabric on a glass table. No load has been seen any of the materials left on the place one night before, in measurement made with electroscope that is made in experiment 1. Besides, a voltage tester that can demonstrate static electricity, also has demonstrated that there is no load on any of the objects. The air of the room where the experiment has been made, has been reduced to 35% humidity rate with the current air conditioner. That value has been demonstrated by hygrometer.

Later on, polystyrene ball has been rubbed on PVC coating on flooring of the chair, also polycarbonate stick has been electrified by rubbing with microfiber made by polyamide. Even though the glass table has no slope to any direction, the ball above it has been pulled fiercely by the stick. Formed acceleration and speed could be increased up to desired value. A visual experiment has been prepared for resetting linear tensile by lifting the stick with the purpose of using surface of the table and about electrostatic attraction with attraction force and an adverse acceleration by downing the ball again from behind that is moving away from itself. In that experiment, the ruler can pull the ball from 2 cm distance. That experiment has been prepared with the purpose of understanding how electrostatic attraction force; it was demonstrated in detail in the link: http ://youtu. be/KvPFblwS4zs Experiment 4: Connection of Static Electricity with Relative Humidity

The mechanism that has been used in Experiment 3, has been repeated 24 hours later. This time, the air conditioner has not been operated. Relative humidity has been 44% according to hygrometer, the results of the experiment and especially acceleration of the ball have been slowed a bit compared to the previous experiment. It has been started to boil water by placing an electric furnace in the ambient. When relative humidity has increased, acceleration of the ball has decreased. Relative humidity could be increased up to 57%.

When this level has been reached, the ball has become almost immovable. Clearly, relative humidity has a serious negative effect on forming electrostatic load and when relative humidity increases, static electricity load cannot be formed.

Experiment 5: Horizontal Spraying Tunnel (Figure 3)

After cleaning a 20 ml spray bottle which is empty and which can perform spraying, a strong paint solution has been placed in that bottle (5% C.I reactive black 5+C.I reactive orange 14 mixture, salt free). When spraying is made on a paper, it has been seen that the color is deepened in a way to be proportional with paint amount fall on the paper. In this point, the purpose was to see paint amount adhered on that paper with spraying technic. Due to the fact that paint amount in that paper is visible, the purpose was to see correlation between invisible coronavirus particles. The more distance is short in experiments, meaning close, the color becomes that much dark and the more it is move away, it starts to get lighter. Thanks to this feature, the purpose was to make invisible coronavirus particles visible and thus, to solve mysteries of coronavirus with that simple and effective method. Later on, ink has been connected to a small peristaltic pump and a stainless-steel spraying nozzle has been added to its outlet. By using a single cell plate in 4 mm thickness made by polycarbonate, a tunnel from 4 parts made in 120 cm x 30 cm dimensions, has been prepared. At one end of prepared tunnel, a metal good spray ejector and a spray operating with 4 bar pressure, have been prepared. Spraying end of that spray is fed by a small peristaltic pump coming from paint container, which is stainless steel and with plastic hose. Since spraying regime of the nozzle is not regular, a holed plate has been places by sliding on side to front of the nozzle. When nozzle has entered inside, this plate has slided to the other side and a time limitation for 0,2 second is obtained. Thus, as much as desired, in other words, spraying paint amount has been standardized. A glass plate in 30 x 30 cm dimensions has been placed on the other side of the tunnel. The wet papers that have been prepared in 3cm x 25cm dimensions and then in dimensions made more smaller, have been adhered on the glass plate, they have been tied to 10 cm distance to the end of the tunnel and in vertical position. Since the wet papers demonstrate deviation due to humidity in the air, the papers have been made wet with propylene carbonate water. The tunnel has been prepared on horizontal position to the ground or with a different slope in an adjustable way. 3 strips have been adhered on paper good that was made wet, on the glass placed on the end of the tunnel.

By adjusting electricity that is given to feeding primary coil of a domestic manufactured flock velvet fabric coating transformer (110) that can give 3000 volts, with a resistant (DIMMER®), outlet voltage has been adjusted to be 1000-2000 volt (average human body can produce and can be loaded by static electricity up to 1000-20000 volt capacitive and as natural). Prepared tunnel has been taken to the experiment to heat a wet cotton piece in microwave with the purpose of adjusting relative humidity respectively for effects in spraying technic with relative humidity adjustment by placing on that cotton piece while vapor exits.

Basic elements those are used in experiment 5 before the invention, are glass sheet (10), wet paper strips or aluminum folios (20), the plate similar to release button which has a hole in the middle (30), spraying nozzle (40), hose (50), juncture (60), lamp (70), cable connected to nozzle (80), cable with pliers (90), cable with alligator mouth cutter at its end (100), velvet fabric coating transformer (110), positive end (P), negative end (N), safety resistance (S) and grounding end (G).

Experiment 5’s mechanism is constructed as follow: First of all, only one layer is cut from single room polycarbonate plate in 4mm thickness and in 120 cm width and 120 cm length, and it is folded, and it can be lifted up to 45 degrees thanks to juncture (60) at a corner of constructed tunnel. When the tunnel is heated from below externally with a 60-watt Edison® filament lamp (70) and at 20 degrees angle, rate of the air in the tunnel reaches to 20 cm/sec. That value is equivalent to breathing speed of an average human. A tesla coil in 500-2000-volt interval has been used a power source. Current has applied to wet paper strips that have been adhered on glass sheet (30x30cm) (10) that stand on 10 cm distance and at opposite side of both the tunnel and spray nozzle or aluminum folios (20). Trials have been made by changing direction and power of current and also on different tunnel angles and different relative humidity values.

Color depth at paper strips have been taken as criterion. Tests have been done in accordance with darkness of color contaminated / friction with a wet clothe (preferably ear cotton) in folios. For humidity adjustment, a cotton cloth in 20 g weight that is made wet with 1-10 g water and heated at 700 watt for 10 seconds in microwave oven, has been used (the best result; 4 g water- 13 seconds). Thanks to this, all electrostatic loads in the tunnel, are disappeared. Hence, electrostatic attraction forces are disappeared.

Experiment 5 that was made in this mechanism, is follows: Various pump types have been used to obtain a regular and homogeneous water mist, peristaltic pump and plastic hose (50) and valve hose (50) have been preferred. Yet, hose (50) is more homogeneous by absorbing impact shocks coming from pump, it can provide a spray conical almost in vapor appearance. In trials, 700-1000-2000-volt levels have been tried. In 2000 volt, very clear results have been obtained. After the tunnel’s angle has been on 20 degree to the ground and 60-watt filament lamp (70) has been operated for 20 minutes, both chimney outlet has been adjusted and color depth on wet papers have increased.

Images have been corrupted whenever hot wet clothe consisting vapor is placed during trial. The reason of that is probably irregular convection currents caused by vapor or distribution of paint to everywhere by breaking electricity areas of steam.

As a result, based on which paper high voltage is given (regardless being positive or negative), that paper attracts paint particles, as a magnet, those are possible to go on its adjacent ones. It is the situation that is the important one and that is wanted to be proven. However, when one of current end contacts with nozzle, the mist begins to be sprayed with a wider conical angle. The same situation arises when current is given to chassis of printer (120). It is thought that the reason of that event is sourced from droplets loaded with the same load trying to move way from each other.

Note: All of above-mentioned trials have been made with papers made wet by water to make them conductive, except aluminum folios.

Experiment 6: (Figure -4)

In Experiment 5, horizontal trials have been made, droplets could not be obtained as small as desired and standardized. For this reason, experiment 6 has been prepared. By combining two separate units in following stages, better results have been obtained.

Basic elements those are used in experiment 6 before the invention are; modified old velvet coating transformer (110), EPSON® brand L-l 110 model printer (120), first wet paper connected to cable with alligator mouth at its end (130), second wet paper (140), third wet paper (150), transparent chest cube made by polycarbonate (160), chassis connection cable (170) taken out of printer (120) and ink particles (180) in picoliter dimension.

Note: Cables have been connected to pins those were sticked on the box by making them wet, take place out of the container, wet papers have been adhered on internal wall of the container, current is passed from the needle.

Experiment 6’s mechanism is constructed as follow: L-l 110 model EPSON® brand printer (120) of Japan seiko. co company has been opened, with the purpose of ensuring that ink that is coming out from nozzle, passes below the machine and exceeds transparent chest cube (160) that was made by polycarbonate by the owner of the invention, that was placed below, lower paper table was taken out by cutting medium section of paper current channel. In the mechanism, medium section of A-4 papers was cut in a way to correspond to the right in the middle. Thanks to this, printer (120) can conduct all ink of black output in 1 cm x 1 cm dimension into transparent box below by not tripping on medium hole in desired dimension. Original EPSON® ink has not been considered suitable for this experiment. The first reason of that is that carbon black dispersion, in other words wet paper diffusion, does not happen. The second reason is to consists of an uncertain composition and glycols for not to be dried at head. However, in order to dry in to be used in that experiment as much as possible and hence to make it similar with needed D.I (deionized) water, ink has been made again. For doing this, by adding 1 g ammonia on 5 g reactive black paint (reactive black 5+ reactive orange 17 mixture- in salt-free form) into D.I water, it has been boiled and cooled and then 3 ml isopropyl alcohol is added and it has been completed to lOOcc and then filtered and loaded to printer (120). Since reactive group consists of halogen, it has been corroded chemically and it has been secured not to break head of printer (120). Black color and especially gray tones have been selected since they can be recognized by human eye. Resolution of EPSON® is 5760 xl 140=6.566.400/inch square in high printing quality, from there, 1000.000 droplets/cm2 can be obtained, it means 1 million droplets in 1 mgr paint approximately. In other words, it becomes 1 droplet 1/1000 mgr. This particle physic can be seen and it means that it can demonstrate behaviors of viruses in laboratory environment.

The test and experiment 6 are performed as follows: Holes of papers with razor without harming papers have been prepared such as in l,5cmx 1,5 cm dimensions in a way to pass a little out of a place of A-4 paper coming in the first printing. This paper can be used until it is deformed. The reasons not to select acetate paper is that it can affect electricity load results. In the first printing, a new paper has been placed in a place in 38 cm below of the machine. As it can be expected, printing could be made to a very wide area and it lost its darker and square shape in its middle such aslOxlO cm2 dimensions. In the second printing, on cable ends those are mounted on the wall (in vertical position), wet papers have been adhered printed again with the effect of its wetness. The ink has been corresponded almost to the paper in previous vertical position, however, the ink has been distributed to a very wide area and in a more complicated shape. Based on this situation, touching to PC (polycarbonate) sheet, caused to load the sheet. These loads have created this abnormality. In fact, this result demonstrated desired and expected meet. In the third printing of this experiment, (+) loads have been connected to the place where there is first wet paper (130) and third wet papers (150), (-) loads have been connected to second wet paper (140). It has been seen that ink particles (180) that are expected to fall down, have hung on that three sheets. In other words, droplets exceeded gravity and adhered on sheets hung on the wall. Even though places of ends have been turned upside down, nothing has changed. Almost all have adhered to side walls without being affected whether current is positive or negative.

In the fourth printing of this experiment, regardless which cable is connected to power source, the result has been the same and only the paper where current is given, has been painted and the others have remained white.

In the fifth printing of this experiment, paper area has been reduced and all three papers have hung on the wall as they were wet. Only the paper connected to current, have attracted ink particles (180) and the other have remained clean. However, due to areas that have been made smaller, colors have been darker and distinctive.

In the sixth printing of this experiment, negative (-) has been connected to chassis line of printer (120) and separately positive (+) end has been connected to each of papers. The paper which electricity is given, has been painted well and the others have remained clean. The same process has been made by connecting positive (+) to chassis and negative (-) to papers in order. In each time, printer (120) has made printing. As expected, it has been observed that electricity has not been affected by end polarity and painted paper in contact, in other words, sub-micron particles have beaten gravity easily under static electricity and created their own routes. When similar trials were tried with aluminum folio, results have not been changed and only dyestuff that was seen better on paper, has been seen weaker and when it was rubbed on a wet ear cotton, it was seen clearly.

In seventh printing of this experiment, 10 g cotton cloth, respectively, was made wet with 1-5-10 g deionized water and heated for 10 seconds in 700w in microwave oven and when their vapor was seen, they were put into the box and printing was made. When cotton cloth consisting 5 g water, has been sunk, it has been seen that ink has been acting as if there was no electricity current. Ink has been distributed to every place of the machine and disappeared. It has corroded saturated steam or in other words, high relative humidity corroded electrostatic laws with internal electrical tires and law of electrostatic attraction has left its place to gravity.

Note: Also, convection current that has been made to up by exiting steam, has demonstrated that the droplets have reached to the ground randomly.

The result and the assumptions: Especially trials that have been made by printer (120), have provided far more reliable results. The most important reason of that is formation of droplets in uniform and microscopic dimension and when we evaluate the results obtained from trials giving management of these droplet by electrostatic attraction forces as they want to and behavior of these droplets as if there is no gravity: If the viruses are distributed to environment whether by droplets spreading during coughing by human or with the role of infection mechanism of diseased persons who have no symptom (meaning, only breathing), it can cause infection in these three ways. Obtained results have been given below:

1- Diseased person can be loaded in terms of electrostatic. In such case, the viruses are also loaded with the same electricity load. The viruses that have been loaded with adverse load to a person in that environment, will move to nose area primarily and to head area directly and quickly since they are loaded with electricity and they will adhere by entering into mouth or nose by being neutralized. If third person is neutral loaded, loaded particles will be attracted to that person at least very few or they will fall to second row.

2- If diseased person is neutral, since the viruses will not be attracted to any object, they will be suspended or they will be immediately attracted to another electro positive or negative person if there is one in that environment. 3- If both diseased person and a person in front of diseased person are neutral, meaning, if there is no electrostatic attraction area, it can be infected only by breathing a breath given from a mouth. In such case, coronavirus can make only one person diseased.

If we remember an event happened in New York: A person has infected other 80 persons those that person has never met, diseased person has learned that he is sick in China and it has been understood that the only mutual point with the other 80 persons was an elevator cabinet based on a backtrack search from video records. Besides, it is an example that 20 hospital nurses in London wore plastic (in fact polyethylene) aprons when they were working at the hospital for protesting purposes and all get coronavirus without exemption. The thing that is wanted to tell is that everyone knows how plastic bags are loaded with electricity. The nurses have tried to protect themselves with a material that is even waterproof, but they have turned into a magnet for the virus. In its fullest sense, they have loaded the viruses in that environment with electricity. Briefly, possibility of being infected by the virus by persons who have no electrostatic load, is low as much as spreading the virus even if they get sick. Airways provides transportation, the virus provides transportation, and movement, meaning mobility energy, provides electrostatic loads. Therefore, the solution is that human being gets rid of their loads with the ground. The easiest way to do that is to wear leather shoes (sole leather) which conducts electricity easily or at least the ones with leather footbed (3).

The solution that has been developed for the solution is: to receive static electricity (300) accumulated at a body via a thread (2) stitched on the end of footbed (3) of shoes (1) and end of its internal area or on middle or on heel section of it, to conduct static electricity (301) to the other end of thread (2) on footbed (3) and to discharge static electricity (302) on footbed (3) section of shoes (1) via thread (2) to the ground.

Thread (2) taking place in the invention, has been manufactured from carbon fiber material between 50%-100% rate in terms of weight. Thread (2) taking place in the invention can be used in, shoes (1) or sandals or slipper or socks or boot or babette footwear’s footbed (3) and internal section. In the invention, text or numbers or pictures or human-animal figures or geometric shapes consist of at least one thread (2) in a way to be on footbed (3) of shoes (1). Basic parts of the invention are; shoes (1) and thread (2). The working principle of the invention is as follows; After a person wears shoes (1), thread (2) inside shoes (1) and the foot contact each other. Thread (2) takes static electricity (300) accumulated on a person and conducts (301) to lower section of footbed (3) of shoes and since thread (2) contacts with the ground, static electricity on thread (2) is discharged (302) to the ground.

In an alternative structure of the invention, footbed (3) is produced with materials such as PVC (polyvinyl chloride), PU (polyurethane), PE (polyethylene) that are footbed (3) material, with an injection on and by placing carbon fiber material (4) that is in 0,2 and 2 g weight discontinuous or continuous filament into a mould producing footbed (3) during production of footbed (3) of shoes (1). In this way, the result can be obtained without making any stitching process.