| Document |
Document Title |
|
JP2872911B2 |
|
|
JPH1146878A |
To provide a study desk that facilitates the use of a personal computer on top of the desk; can provide an optimum illuminating effect while the personal computer is not used; enables a display to be installed at the desired position on ...
|
|
JP2857980B2 |
|
|
JPH1142125A |
To enable documents or drawings to be spread over the entire top surface of the top plate of a desk by securing a space with a height of about 2 cm between a tray and the top plate of the desk by means of a desk top tray position setting...
|
|
JPH1145614A |
To use the same luminaire when a desk such as a learning desk is used both with a shelf being attached and with the shelf being removed as a flat desk. To mount a luminaire to a shelf plate S, a metal fitting 21 of a clamp 20 and spacer ...
|
|
JPH119349A |
To improve the handleability of the drawer of a wagon by supporting a top plate movably back and forth by a pair of left and right guide rails disposed on the upper surface of a column connection rod and extended in front and back direct...
|
|
JPH119348A |
To provide a convenient learning desk where a free degree at the time of arranging an equipment such as a personal computer, etc., is improved in the learning desk provided with a bookstand in a bookshelf on a top plate. Two vertical rea...
|
|
JPH119347A |
To provide a desk with a bookshelf, by which working space on the desk is enlarged. The bookshelf 14 is erected in the rear part of a top plate 10 so as to be freely attachable/detachable and also a top plate support body 12 is made to b...
|
|
JP2845066B2 |
|
|
JPH10337221A |
To provide a multifunctional and convenient reading desk which can be used even in a seated position or with the face upward, by which the adjustment of inclination of a book and the good opening condition thereof can be maintained, and ...
|
|
JP2587433Y2 |
|
|
JP2839235B2 |
To resolve the problem that a worker must bear a panel all the time until the fastening work of bolts is completely finished and the work efficiency is very bad in the past in the stage fitting the panel to the right and left leg element...
|
|
JP2587022Y2 |
|
|
JP2586534Y2 |
|
|
JPH10304938A |
To improve the usability of a mouse and to make possible to fix and store it compactly by providing a subsidiary table in a way that allows it to be pulled out on one side of a table that is mounted into a case in a manner that allows it...
|
|
JP2822310B2 |
|
|
JPH10295457A |
To promote availability of a desktop bookcase as freely as one likes. At the rear of the upper surface of a desk board 2, side plates 9a, 9b are securely placed. While the upper shelf body 7 is provided detachably to the lower shelf body...
|
|
JPH10295449A |
To provide much better freedom of use by equipping with a pair of left and right supports which support a hood in an illuminator, free to rotate front and back against left and right boards of a shelf body, structuring the supports elast...
|
|
JP2584799Y2 |
|
|
JPH10294014A |
To provide a lighting system for vertically separated type desk shelves in a lighting system to be installed at vertically separated type desk shelves being mounted at a rear part of a top plate of a desk which, in a mode wherein the upp...
|
|
JPH10294011A |
To illuminate a full face of a desk tabletop substantially uniformly in a normal use state and retract an illumination fixture to the other side when a personal computer body part and a CTR display are loaded at one side part of the righ...
|
|
JPH10286127A |
To provide a study desk by which an optimum illumination effect is obtained in a period without using a personal computer, etc., a display, etc., is arranged in a desired position on the desk in a period with the usage of the personal co...
|
|
JPH10289616A |
To provide a lighting system for a study desk which permits glaring light not to be given to a low pupil at lower grade of elementary school who uses a study desk, and permits the top surface of the desk to be illuminated with keeping su...
|
|
JP2814426B2 |
PURPOSE: To simply plant a support column for attaching an optional component, on a desk with a sufficient strength. CONSTITUTION: An attaching plate part 19a formed at the lower end of a support column 19 is made to abut against a verti...
|
|
JP2814425B2 |
PURPOSE: To provide a connecting device in which no waste angular moment is generated even when the axial center of a clasp screw exists outside a mounting part and which surely and solidly connects a rack to a top board. CONSTITUTION: T...
|
|
JP2583437Y2 |
|
|
JP2812631B2 |
|
|
JP2810027B2 |
|
|
JP2810026B2 |
|
|
JP2809970B2 |
|
|
JP2582474Y2 |
|
|
JPH10262743A |
To provide a vertically separable type desk shelf in which the positioning is precisely performed when an upper shelf is connected onto an upper part of a lower shelf, the longitudinal movement of the upper shelf can be surely regulated ...
|
|
JP2806206B2 |
|
|
JPH10248646A |
To provide a writing table, which is easily usable either in a standing posture or a sitting posture on a wheel chair and is easy to secure a placement space of the same by depressing the measurement increment of depth of the same as sma...
|
|
JP2797065B2 |
|
|
JPH10243827A |
To spread a large drawing or the like on a desk by protruding side plates and partition plates at the rear face board and laying shelf-boards between adjacent side plates and partition plates to form an upper shelf and fixing posts exten...
|
|
JPH10234476A |
To easily position a desk by forming dovetail grooves on the right and left side frames of a partition panel, unreleasably inserting brackets into the dovetail grooves in the wall face direction of the partition panel, and fixing the bra...
|
|
JPH10234480A |
To expand OA equipment space on the upper surface of a desk top plate under simple constitution, perform a job using OA equipment as well as a general clerical work without hindrance, and easily perform a maintenance work for the OA equi...
|
|
JP2579683Y2 |
|
|
JP2787749B2 |
|
|
JPH10215954A |
To enlarge a space for OA equipment installation on the upper surface of desk top plate in simple configuration and to execute a job to use OA equipment and general desk work without trouble by forming a facing part, partition face part ...
|
|
JPH10211033A |
To enable a panel to be height-adjustably attached to the side of the top plate of a desk, by equipping plural engaging holes arranged at prescribed intervals in the vertical direction on one of a bracket fixed to plural leg columns and ...
|
|
JPH10201542A |
To sufficiently and freely deal with the change of job conditions or the like by using a punching work hole formed on a side wall panel as a lock part for an additional member such as a hook. At a main body 1 of cabinet opening only its ...
|
|
JP2780620B2 |
PURPOSE: To simplify a mounting operation by forming a square coating member having a coating part and a leg holding part, press fitting the leg holding part into a desk body to mount the square coating member to a desk body, then press ...
|
|
JPH10192075A |
To simplify a structure by turning one lower end to a start point for the going path part of a guide receiving part in a loop shape, lowering a guide engaging part from an upper end through an intermediate supporting part and moving it t...
|
|
JP2779802B2 |
The subject of the present invention is a unit-composed supporting structure for office tables and desks, constituted of a cylindrical connecting element having a substantially horizontal axis (2), equipped with a plurality of lateral co...
|
|
JP2767396B2 |
|
|
JP2767092B2 |
|
|
JP2767091B2 |
|
|
JPH10155561A |
To easily more, carry and keep a blind by mounting small-sized, lightweight and thin-type blind to a study desk by an attachable and detachable Velcro (R) or the like. This small-sized, lightweight and thin-type blind 1 for study constit...
|
