BACKGROUND ART [0002] Specifications for softballs used in competitive and tournament play have generally been issued by two governing organizations, the United States Specialty Sports Association (USSSA) and the American Softball Association (ASA). Softballs range in size from 10 to 16 inches in circumference, with 12-inch softballs being the most widely used. The specifications for a 12-inch softball include the following requirements: Coefficient of Restitution (COR) of 0.40 to 0.50 ; circumference of 11 7/8 to 12 1/8 inches; compression limits of 375 or 525 pounds, depending on the organization; and weight of 6 1/4 to 7 ounces (175 to 200 grams).

[0003] The COR is extremely important because the COR generally determines the speed of the ball offthe bat. More specifically, a ball's COR is the ratio of the relative velocity of the ball after and before direct impact with a fixed surface. As discussed in greater detail below, COR is measured by propelling the ball against a hard surface at 88 feet-per-second (fps) and measuring the rebound speed of the ball. COR is expressed in terms of the ratio of the rebound speed to the initial ball speed of 88 fps. Consequently, the COR can vary from zero to one, with one being equivalent to a fully elastic collision and zero being equivalent to an inelastic collision.

[0004] There are other qualities of softballs that are not included in the official specifications or physical properties that are important to players. Examples of these qualities include : the sound of the ball when batted ; the"feel off the bat"or, the feel that the batter experiences at the moment of impact of the bat with the ball ; flight consistency; durability; the grip and feel of the ball in both bare hands and in a glove; and the ability of the product to maintain those characteristics over an extended period of time.

[0005] The various associations that govern softball are continuously investigating the merits of lower compression softballs and how they could benefit the game of softball. Urethane and cork centered softballs have to comply with softball association compression limits that are currently set at either 525 Ibs. or 375 Ibs., depending on the league and level of play. A softball's compression is obtained by measuring the amount of force required to compress the ball 0.25 inches as prescribed by ASTM methodology (ASTM method F 1888-98). That is, compression determines the pounds of pressure per square inch required to compress a softball 0.25 inches.

Compression can be measured using universal test machines that compress the ball between two flat steel platens and record the force with a load cell, such as InstronTM, MTSTM or other types machines. Using typical urethane and cork softball constructions, softball manufacturers continually adjust ball constructions to meet the softball associations'compression requirements while continuing to satisfy the ball performance demands required by the players. What is needed in the art is a softball where the performance characteristics can be altered as desired such that the softball has a very low compression while maintaining the standards for COR, durability and performance.

[0006] An innovative, multi-layer softball design has been developed that can satisfy the need for lower compressions, while maintaining the performance of a traditional softball. The COR and durability of the new multi-layer product are comparable to a traditional softball at much lower compressions. This innovative new ball also minimizes bat denting and reduces the amount of sting associated with hits that miss the sweet spot of the bat.

DISCLOSURE OF THE INVENTION [0007] The present invention relates to softballs that have very low compression, but maintain the traditional coefficient of restitution (COR) values of standard urethane core softballs. It has been determined that the use of multiple core layers can be used to produce a softball having the performance of a traditional ball.

[0008] The present invention also relates to softballs having multiple core layers.

Specifically, the invention relates to a softball having a core, at least one outer core or mantle layer, and a cover. More specifically, the compression of the softball is very low, but the COR and durability are comparable to standard softballs currently produced.

[0009] Other objects of the invention will become apparent from the specification, drawings and claims.

BRIEF DESCRIPTION OF THE DRAWINGS [0010] The following is a brief description of the drawings, which are presented for the purposes of illustrating the invention and not for the purposes of limiting the same.

[0011] Figure 1 shows a perspective view of a softball having an outer cover layer ; [0012] Figure 2 shows a cross section of a softball with a core, an outer core or mantle layer and an outer cover layer; and [0013] Figure 3 is shows a cross section of another embodiment of the softball with a core, two outer core or mantle layers and an outer cover layer.

DESCRIPTION OF THE BEST MODE [0014] Referring to Figures I to 3 of the drawings, a perspective view of a softball 10 having an outer cover layer 16 is shown. The cover layer 16 may have traditional stitching, or it may have"stitches"that are molded into the cover to appear like actual stitches. A cross section of a softball 10 is illustrated in Figures 2 and 3 incorporating the lower compression core of the invention. The game ball 10 that is illustrated in Figure 2 is a softball construction comprising a composite core 11 and a cover layer 16 surrounding the composite core 11. The composite core 11 includes a central core 12 and a first outer core or mantle layer 14 around the central core 12.

The game ball 10 that is illustrated in Figure 3 is a softball construction comprising a composite core 11 having a first and second mantle layer 14,15. That is, the composite core 11 includes a central core 12, a first core or mantle layer 14 around the central core 12, a second outer core or mantle layer 15 surrounding the first mantle layer 14. A cover layer 16 thereby encircles the second outer core or mantle layer 15. The terms"core layer"and"mantle layer"are used interchangeably throughout, and they refer to a layer disposed about a central, preferably spherical, core 12.

[0015] Any desired cover material known in the art can be used on the ball 10. The cover layer 16 is preferably, but not necessarily, stitched to the composite core 11, especially if the ball 10 is to be used in competitive play. The cover 16 may also be molded on the ball 10 using processes known in the art, such as a plastisol fusion process, particularly if the softball 10 is not for competitive play in leagues requiring stitched covers. Examples of materials suitable for use as the cover layer 16 include, but are not limited to: polyurethanes, including thermoplastic polyurethanes; polyvinylchloride (PVC); natural leather; synthetic leather ; and composite leather.

Materials suitable for use as the central core 12 include, but are not limited to: cork; kapok; urethanes; thermoplastics ; and other rubber materials generally known in the art. Examples of materials suitable for the first and second mantle layers 14,15 include, but are not limited to: urethanes; thermosets; thermoplastics ; and the like. Preferably, the central core 12 and the first and second mantle layer (s) 14,15 comprise urethane.

[0016] Looking to Figure 2, the multi-layer softball 10 of the invention comprises a central core 12, at least one mantle layer 14, and a cover 16 covering the mantle layer 14. The goal is to achieve a certain coefficient of restitution (COR) and durability of the ball 10, and preferably, to have a low compression. The inventors have found that a softball 10 having multiple layers constructed of certain materials, such as those described above, exhibits low compression while maintaining desired COR and durability levels necessary for softballs 10 used in competitive play. It was determined that using a softer outer core or mantle layer (s), such as a softer urethane or other foam material, would reduce the overall compression, thus reducing the bat denting, compression and the like, while maintaining durability and performance.

[0017] A typical softball with a polyurethane core has a construction comprising a urethane core and a single cover layer. Other softball designs may have cork centers that are traditionally wrapped in cloth or yarn windings, but this invention is not concerned with that type of softball.

The softballs 10 of the invention have an additional mantle layer (or layers) 14,15 between the central core 12 and the cover 16, as previously described. This mantle layers 14,15 are added to control or to change the performance characteristics of the ball 10 and to make it feel softer yet have many of the desirable characteristics of a traditional softball.

[0018] The unique multi-layer construction of the present invention preferably features the dual core or composite core design and a traditional stitched softball cover 16, such as a leather, synthetic leather or composite cover. The central core 12 is preferably comprised of a semi-rigid to rigid urethane composition with a density of approximately 10 to 30 Ibs/ft3, more preferably 15 to 25 lbs/ft, and even more preferably 18 to 22 Ibs/ft3. The size, compression, and resiliency of the central core 12 can vary with the material selection and mix ratio ofthe urethane system used.

The size of the central core 12 and outer core layer (s) may vary as desired, but the completed composite core 11 must be equal to the size of a standard 12-inch softball core resulting in a stitched softball that meets the size requirements of various softball associations. In other organizations, an 11-inch softball may be used. For purposes of this invention, the 12-inch softball is the primary focus, although the concept applies to other size softballs as well by appropriately modifying the sizes of the central core 12 and the thick ness of the mantle layer 14.

[0019] The standard diameter of a 12-inch softball core can range from about 3.650 to about 3.700 inches, preferably about 3.680 inches. The central cores 12 for the multi-layer softball 10 of the present invention must be reduced in size to accommodate the outer mantle layer or layers 14,15. The thickness of the outer mantle layer or layers 14, 15 is preferably from about 0.0500 to about 0. 500 inches, more preferably 0. 100 to 0.250 inches, even more preferably about 0. 125 to about 0. 135 inches, and most preferably about 0.125 inches or 1/8 inches. In order to obtain a mantle layer or layers 14,15 with a preferred thickness of 0.125 inches, the central core 12 is produced to range in size from about 3.41 to 3.43 inches, preferably about 3.42 inches (finished size). Other sizes can also be produced as desired, depending on the desired physical properties and thickness of the mantle layer 14,15. To produce a central core 12 in the range of about 3.41 to 3.43 inches, a mold (not illustrated) having a size of approximately 88.5 mm is preferably used. Generally, urethane systems have some shrinkage after molding, which needs to be taken into account when determining the proper mold size. For example, while an 88.5 mm mold produces an central core 12 approximately 3.484 inches in diameter, the central core 12 will shrink about 0.040 inches to produce a final central core 12 of approximately 3.444 inches in diameter.

[0020] After the central core 12 is molded, it may be further processed, for example, by sanding. The central core 12 is sanded down for two reasons. First, it gives the manufacturer the opportunity to achieve a target finished size (i. e. , 3.42 inches) with a limited number of molds.

Second, the surface of central core 12 generally contains mold release agent, which is necessary to remove central core 12 from the mold. The sanding of central core 12 removes the mold release layer and significantly improves the adhesion between the central core 12 and the adjoining first outer mantle layer 14. Sanding also improves adhesion between the completed composite core 11 and the cover 16.

[0021] The selection of the urethane system and the proper mix ratio is important to achieve the desired central core compression and COR. In addition to varying the COR of the central core 12, the compression can also be affected by altering the mix ratio of the urethane system.

The compression of the central core 12 is preferably about 300 to 600 Ibs., more preferably about 325 and 575 Ibs., and even more preferably about 325 to 475 Ibs.

[0022] Any suitable urethane polymer system known in the art may be used to create both the central core 12 and mantle layers 14, 15. Generally, the urethane system is a mixture of a polyol and an isocyanate. Examples of suitable polyols include, but are not limited to, polyester polyols, polyether polyols, and combinations thereof. Examples of suitable isocyanates include, but are not limited to, diphenylmethane diisocyanate (MDI) ; toluene diisocyanate (TDI); and combinations thereof, although other suitable diisocyanates may be used. Preferably, the polyol and isocyanate are mixed at a ratio of 40 to 100 parts by weight polyol to 40 to 100 parts by weight isocyanate. Examples of commercial urethane materials suitable for use in the invention include Elastoflex urethane systems, available from BASF, as well as urethane systems available from Bayer Chemical, Uniroyal, and the like. Preferably, the mix ratio of polyol to isocyanate is from about 100/80 to about 100/40, more preferably from about 100/70 to about 100/45, depending on the urethane system used and the compression desired. These mix ratios will produce an central core 12 having a compression of about 350 to about 550 Ibs., and the central core 12 will also be able to stand 185 blows on the Spalding"Pound Test" (details discussed below). It is important to note that over-indexing the system (or changing the mix ratio of polyol to isocyanate too much from the recommended ratio) will increase the compression of central core 12 considerably, but it can compromise the durability of central core 12.

[0023] When the desired mix ratio is selected, the various components of the central core 12 are mixed using currently commercially available urethane mixing and metering equipment. A predetermined amount of the mixed urethane, preferably from about 100 to 130 grams, more preferably from about 115 to 120 grams, is then added to the mold via an"open pour"method.

The mold is closed and the urethane is allowed to foam. The urethane will react and expand and take the shape of the mold. The mold then passes along a conveyor system and is opened after approximately eight minutes. The amount of time the urethane mixture remains in the mold will have an effect on the shrinkage of central core 12. Catalysts in the urethane system stop or shut off the reaction after a certain amount of time. This allows the urethane system to cross link and harden. As mentioned above, after molding, central core 12 is removed and, if desired, sanded to the appropriate size.

[0024] The second mantle layer 15 of the composite core 11 is preferably an elastomeric system, more preferably an elastomeric urethane system, that significantly reduces the compression of the completed composite core 11, but does not compromise overall performance of the ball 10. The density of the second mantle layer material 15 is preferably 20 to 40 lbs/ft3, more preferably 25 to 35 Ibs/ft3. A softball 10 made with the multi-layer design of the invention will have a compression under 400 lbs. preferably under 375 Ibs., more preferably under 325 Ibs. if the thickness of the outer layer is about 0.125 inches or greater. The thicker the second mantle layer 15, the lower the compression will be.

[0025] The second outer mantle layer 15 may be formed from any suitable urethane system.

One preferred urethane for use in the outer layer is BASF's Elastocast elastomeric system. The urethane system is again mixed using commercially available urethane mix and metering equipment and dispensed into a mold (not illustrated) where the central core 12 has been placed.

A shot weight of from about 45 to 50 grams is added to a mold. To produce a composite core 11 of the correct size, a mold of about 94.2 mm is preferably used. Preferably, the mold has been modified with pins to hold the central core 12 in place while the first outer mantle layer 14 is molded about the central core 12. Several stationary pins (not illustrated), preferably three or more, extend into the mold in both the top and bottom hemispheres in order to hold the central core 12 in place and ensure proper distribution of the outer layer about the central core 12. The inventors determined that a two shot process produced a better product because it allowed the outer core layer 14,15 to overcome the surface tension in the mold and flow properly. Half of the shot is poured into the bottom of the mold. The central core 12 is placed onto the pins in the bottom hemisphere of the mold. The second half of the shot is then poured directly over the central core 12. This wetting of the surface helps the urethane system foam more readily. The mold is then closed and is passed along the conveying system. The urethane system reacts and expands to produce the second component, the second outer core layer 15, of the dual core softball design of the invention. For additional outer core layers beyond the first and second outer core layers 14,15, the above process is repeated with appropriate mold sizes and weights.

[0026] The 94.2 mm mold is used to produce a thickness on the second outer layer 15 of approximately 0.125 inches. The 94.2 mm mold has a diameter of 3.709 inches. As previously discussed, there is some shrinkage of central core 12, approximately 0.040 inches during the cooling process. After molding and shrinkage, the completed composite core 11 is approximately 3.67 inches.

[0027] The size and thickness of the core layers 14,15 are determined via the following procedure. The size of the central core 12 (approximately 3.42 inches) is subtracted from the completed size of the composite core 11 after shrinkage (about 3.67 inches). The difference (0.250 inches) is then divided by two (as there is a layer on either side of the central core 12 in a cross-section) to get the thickness of the first outer core layer 14 (0.125 inches on each side of the central core 12). This method can be used to determine the appropriate central core 12 size for a desired outer core layer thickness. For example, for a composite core 11 with an outer core layer thickness of 0.177 inches, a finished central core size of approximately 3. 334 inches would be used. To obtain this core size, an 86.5 mm mold would be necessary, which would produce a central core 12 of 3.366 inches (3.406 inches-0. 040 inches for shrinkage). Central core 12 could then be sanded down to achieve the target size of 3. 334 inches. The same procedure is used for multiple layers.

[0028] In one preferred embodiment, the second mantle or outer core layer 15 is formed over the first outer core layer 14. In one preferred embodiment, the second outer core layer 15 is very thin and harder than the first outer core layer 14. A harder layer makes the ball 10 feel more like a traditional harder ball, while still having a low compression. In another embodiment, two or more softer layers may be molded over the central core 12.

[0029] Additional materials, as known in the art, may be added to the central core 12, the first and second outer core layers 14,15, or both, as desired. Such additional materials include water, catalysts, blowing agents, surfactants, dyes, and the like.

[0030] The material that is selected for the cover 16 depends on the weight ofthe completed composite core 11 and the desired finished properties and uses. The finished ball 10 weight must be between about 175 to 200 grams, preferably about 180 to 190 grams, more preferably about 185 grams. A multi-layer composite core 11 that uses a central core 12 of approximately 115 grams and an outer layer of approximately 50 grams would have to use a lightweight composite "leather"cover 16 to achieve the necessary finished ball weight. A stitched composite"leather" cover 16 would only increase the weight of the ball 10 by approximately 15 grams. In order to use a traditional leather or synthetic leather cover 16 on this ball 10, the weight of the completed composite core 11 would have to be about 150 grams, requiring an central core weight of about 100 grams or a different thickness core layer. The lighter central core 12 is possible, but it may compromise the durability of the product. As an alternative, decreasing the density of the first or second outer mantle layer 14,15 would decrease the weight of the composite core 11. However, decreases in density often result in drops in COR performance of central core 12.

EXAMPLES [0031] In the following examples, sample multi-layer softballs 10 were made using a 100 gram shot for the central core 12. The samples were made with two different outer core layer thicknesses (0.1375 and 0.177 inches) at two COR levels (approximately 0.44 and 0.47).

[0032] Coefficient of Restitution (COR) of the softball was measured by a Jugs@ pitching machine (as sold by The Jugs Company) with ballistic screens. In the test, the softball 10 was propelled by two rotating pneumatic tires at a ball speed of 88 ft/sec. against a steel plate positioned eight feet from the point where the softball 10 is pinched and subsequently hurled by the rotating tires. The COR is return or rebound velocity divided by the initial velocity.

[0033] Durability of the softball 10 was measured using the Spalding durability"Pound Test". To perform the test, central core 12 is placed in a retainer cup of a softball pound tester.

The hammer used for pounding the ball is placed approximately 98 3/4 inches from the ball. The hammer weights about 7 1/2 pounds, the radius of the hammer is about 13/32 inches, and it travels at a speed of about 20.83 to 20.84 ft/sec. The test consists of up to 185 blows to the ball.

If the ball cracks, fewer blows are made. After testing, the balls are placed in a cold room for 2 hours before any post-pound test measurements are taken.

Example 1: [0034] A first group of multi-layer softballs 10 was produced. The central core 12 was produced according to the parameters in Table 1. Both 0. 440 and 0.470 COR softballs 10 were made for testing. Two different, but similar, urethane systems were used for each size. The central cores 12 of the 0.44 COR products were made with BASF Elastoflex 25066R urethane, while the 0.47 COR products were made with BASF Elastoflex 25063R urethane. Multi-layer variations 1 and 2 were produced with an outer mantle layer 14 having a thickness of about 0.177 inches. Variations 1 and 2 were produced using an 86.5 mm mold for the central core 12 and a 94.7 mm mold for the outer mantle layer 14. Multi-layer variations 3 and 4 were made with an 88.5 mm mold for the central core 12 with a 94.7 mm. mold for the outer mantle layer 14, and the outer mantle layer 14 has a thickness of about 0. 1375 inches.

[0035] Variations 1 and 2 were compared to the core of a DudleyTM WT-12RF80 softball.

Variation 1 compared very favorably to the control core. The COR of Variation 1 was higher than the COR of the control core at 60 mph, and very close to the COR of the control core at 40 and 80 mph. However, the compression of Variation 1 was only 171 Ibs., which was considerably lower than the 565 bs. compression of the control. Variation 2 had a thinner outer mantle layer 14 (0.1375 inches) than Variation 1 (0.177 inches). The compression of Variation 2 was 200 lbs. The COR of Variation 2 was slightly lower than the WT-12 RF80 control ball, but within legal limits. Variation 2 multi-layer balls 10 had higher COR values than the Dudley WS-12 RF80 at 40,60, and 80 mph. Variation 2 was chosen for the player test because it was closer to desired final product specifications, which include a multi-layer softball 10 with an outer mantle layer 14 of approximately 0.125 inches. Additionally, the thinner outer core layer produced a softball having a firmer feel than ball of Variation 1.

[0036] The 0.47 COR multi-layer samples (Variations 3 and 4) were tested against the Dudley WT-1 2RF. Both multi-layer softballs 10 had significantly lower compressions than the control (240 Ibs. or less for the multi-layers vs. 494 Ibs. for the control). Variation 3 had an outer mantle layer 14 with a thickness of about 0.177 inches, and higher COR values than the control at 40,60, and 80 mph. Variation 4 had COR values that were very similar to the control balls at all three firing velocities. Both of the multi-layer balls 10 produced survived 185 blows for the durability test. The durability of these central cores 12 was not quite as good as earlier samples because of the selected shot weight. These samples used a 100 gram shot weight, instead of a 115 gram that provides better durability.

TABLE 1 A B C D Urethane Elastoflex Elastoflex Elastoflex Elastoflex System 25066R 25063R 25066R 25063R C. O. R. 0.440 0.470 0.440 0. 470 Mix Ratio 100/71. 5-100/72. 0 100/66. 0-100/71. 5-100/66. 0- 100/66.5 100/72.0 100/66.5 Mold Size 86. 5 mm 86.5 mm 88.5 mm 88.5 mm Sanded Core 100 Grams 100 Grams 100 Grams 100 Grams Weight Size Range of 3.345"-3. 365" 3. 345"-3. 365" 3. 420-3. 440" 3. 420-3.440" Sanded Cores [0037] The outer mantle layer 14 was molded using 94.7 mm molds with the modified pins.

The outer mantle layer 14 was molded to have a thickness of about 4. 5 mm (approximately 0. 177 inches) using the 3.35 inches (nominal) central cores 12 shown in Table 1 (Cores A and C), and about 3.49 mm thick (approximately 0.1375 inches) using the 3.43 inches (nominal) central cores (Cores B and D). All outer mantle layers 14 were molded using the ElastocastTM urethane system. The multi-layer cores 11 were tested for size, weight, compression, COR and durability.

Test results are shown in TABLES 2 and 3 below.

TABLE 2 Variation #1 Central core'A' (. 44 COR Central core-86. 5 mm Mold) With BASF ElastocastTM Outer Layer Central Mantle Layer Core Weight Size Size Eq. Comp. Comp. Eq. core No. (g) Pole (in) (in) Pole (Ibf) (Ibf) A Elastocast 1 148.6 3.701 3. 700 177.4 161.4 A ElastocastTM 2 148.0 3.683 3.697 195.5 175.3 A ElastocastTM 3 146.3 3.683 3.697 177.4 156.1 A Elastocastm 4 150.4 3.698 3.701 156.7 164 A ElastocastTM 5 145.2 3.685 3.703 179.7 157.1 A ElastocastTM 6 145.9 3.682 3.703 190.0 160.4 Ave. 147.4 3. 689 3.700 170. 9 Central Mantle Layer Core COR @ COR @ COR @ 80 mph Durability core No. 40 mph 60 mph A ElastocastTM 1 0.489 0.444 0. 408 185 blows A ElastocastTM 2 0.494 0.451 0.404 Ave. 0.492 0.448 0. 406 Variation #2 Central core'C' (. 44 COR Central core-88. 5 mm. Mold) With BASF ElastocastTM Outer Layer Central Mantle Layer Core Weight Size Size Eq. Comp. Comp. Eq. core No. (g) Pole (in) (in) Pole (Ibf) (Ibf) C ElastocastTM 1 143.6 3.698 3.703 213.9 209.7 C Elastocast 2 144 * 7 3.696 3.706 199. 0 201. 4 C ElastocastTM 3 140. 0 3.670 3.701 225.9 197. 4 C ElastocastTM 4* 144.8 3.689 3. 706 212.9 205.3 C ElastocastTM 5* 142.7 3.699 3.709 187.7 180. 5 C ElastocastTM 6 145. 5 3. 699 3.708 206. 5 206. 6 Ave. 143.6 3. 692 3. 706 203. 9 Central Mantle Layer Core COR @ COR @ COR @ 80 mph Durability core No. 40 mph 60 mph C ElastocastTM 1 0.485 0.432 0.397 Some denting C ElastocastTM 2 0.488 0.437 0. 404 Ave. 0. 487 0. 435 0. 401 * Denotes Cores that had a Leather Cover Stitched Over them. 0.44 Control Item Control Core Ball Comp. Comp. COR @ COR @ COR @ 80 # Pole Eq. 40 mph 60 mph mph 43-WT 12 RF80 1 567.5 567.8 0.492 0.439 0.405 141 (COR. 44) 43-WT 12 RF80 2 566.4 559.8 0.497 0.439 0.409 141 (COR. 44) Ave. 565. 4 0. 495 0.439 0.407 Item Control Core Ball Comp. Comp. COR @ COR @ COR @ 80 # Pole Eq. 40 mph 60 mph mph 43-WS 12 RF80 1 412 --- 0. 475 0.433 0.397 221 (COR. 44) 43-WS 12 RF80 2 418---0. 465 0.429 0.398 221 (COR. 44) Ave. 415. 0 0. 470 0.431 0.398 TABLE 3 Variation #3 Central core'B' (. 47 COR Central core-86.5 mm. Mold) With BASF Outer Layer Central Mantle Layer Core Weight Size Pole Size Eq. Comp. Comp. Eq. core No. (g) (in) (in) Pole (ibf) (Ibf) B ElastocastTM 1 149.6 3.678 3.698 201.2 172.8 B Elastocast 2 149.7 3.684 3.691 183.8 180 B ElastocastTM 3 150. 7 3.688 3.693 186.7 173.8 B ElastocastTM 4 147.5 3.689 3.696 167.7 157.5 B ElastocastTM 5 149.8 3.701 3.704 172.7 166.1 B Elastocast 6 147.5 3.682 3.693 173.3 156.6 Ave. 149.1 3.687 3.696 174. 4 Central Mantle Layer Core COR @ COR @ COR @ 80 mph Durability core No. 40 mph 60 mph B ElastocastTM 1 0.522 0.471 0.435 185 blows (minor denting) B ElastocastTM 2 0.523 0. 470 0. 438 Ave. 0. 523 0. 471 0. 437 Variation #4 Central core'D' (. 47 COR Central core-88.5 mm. Mold) With BASF Elastocast Outer Layer Central Mantle Layer Core Weight Size Pole Size Eq. Comp. Comp. Eq. core No. (g) (in) (in) Pole (Ibf) (Ibf) D ElastocastTM 1 147. 5 3. 677 3.698 262. 9 239.7 D ElastocastTM 2 143. 5 3.672 3.698 247.9 233.6 D ElastocastTM 3 147. 4 3.696 3.712 234.2 229.8 D ElastocastTM 4* 147.3 3. 701 3.710 232.8 232 D ElastocastTM 5* 147. 4 3.695 3.700 249.4 230. 4 D ElastocastTM 6* 147.1 3.699 3.711 242.9 232.4 Ave. 146.7 3.690 3.705 239.0 Central Mantle Layer Core COR @ COR @ COR @ 80 mph Durability core No. 40 mph 60 mph D ElastocastTM 1 0.517 0.465 0.429 185 blows (minor denting) D Elastocast 2 0. 517 0. 463 0. 427 Ave. 0.517 0. 464 0. 428 * Denotes Cores that had a Leather Cover Stitched Over them. 0. 47 Control Item # Control Core Ball Comp. Comp. COR @ COR COR @ Pole Eq. 40 mph @ 60 80 mph mph 43-131 WT 12RF 1 519. 3 513. 2 0. 521 0. 471 0.433 (COR. 47) 43-131 WT 3 473.6 470.8 0.515 0.467 0.432 (COR. 47) 43-131 WT 12RF 5 501.1 488.7 0.512 0.463 0.432 (COR. 47) Average 0. 516 0. 467 0. 432 [0038] Initial field tests that were conducted using the multi-layer softballs 10 produced in Example 1 yielded positive comments from athletes with different skill levels, ranging from players new to the game to players having played for as many as 25 years. The tests were conducted at Rivers Park in Chicopee, MA. Variations #2 and #4 were compared to Dudley's WT12-RF softball, which is a 0.47 COR softball. Both of the multi-layer ball 10 samples were stitched with leather covers 16. The two central cores 12 were made with approximately 100 gram shot weights, which allowed the use of the heavier leather cover 16. Variation #2 was a 0.44 COR ball made with a 0. 138 inch outer core layer, while variation #4 was a 0.47 COR ball with the same outer core layer thickness. All of the test balls 10 had a final weight (including the cover) of approximately 185 grams. The athletes were pitched 16 balls total in the following sequence : five control balls, three multi-layer balls (#4), five controls, and three multi-layer balls (#2). The players were then asked to fill out a questionnaire that compared the multi-layer softballs 10 to the controls. The survey focused on the feel of the new product on impact, the distance, the sound, the flight consistency, and any additional concerns or comments. In this initial test, both types of sample softballs were tested against the WT-12RF to avoid confusion.

Later player tests compared 0. 44 and 0.47 COR multi-layer core softballs versus control softballs at the same COR level.

[0039] The overwhelming response by the players was that the multi-layer softball 10 was softer than the traditional control ball, but traveled the same distance as the control. All of the participants felt that the flight of the ball 10 was consistent each time the ball 10 was hit. Players did notice a difference in the sound of the ball off the bat, commenting that there were"lower pitched sounds"and"less ping"when the ball 10 was struck. Some benefits of the multi-layer softball 10 that were mentioned included"the ball was slightly softer and easier to hit through." Additional comments referred to"less sting in the hands on miss-hits."The players'feedback did correlate well to the static data of the softballs. The multi-layer softball products had compressions that were just under 240 lbs., while the WT-12RF was just over 500 Ibs. The COR values for the 0.47 COR multi-layer product was similar to the COR values of the 0.47 COR control ball at 40,60, and 80 mph.

Example 2 [0040] Based on the data obtained using the balls 10 produced in Example 1, another set of multi-layer softballs 10 were produced, as shown in TABLE 4 below. The central cores 12 were made to be approximately 3.42 inches in diameter, and the outer mantle layer 14 was approximately 0.125 inches thick. The central core 12 was made with about a 115 gram shot weight (instead of a 100 gram shot weight as in Example 1), which increased the durability of the final product. The thinner outer mantle layer 15 increased the compression of the completed composite core 11, but maintained it at a level of under 325 Ibs. for the final softball 10. The additional weight in the central core limited the weight, and therefore the type, of cover 16 used.

The samples produced in Example 2 had a stitched composite leather cover 16 to obtain the proper finished ball weight. If a leather cover 16 is desired, the weight of the central core 12 or the density of the outer core material must be decreased.

[0041] As in Example 1, both 0.440 and 0.470 COR softballs 10 were made for testing. Two different urethane systems at two different mix ratios were used for each COR level. In this example, the central cores 12 were molded in the 88.5 mm molds and sanded down to a finished size of 3.41-3. 43 inches, preferably about 3.42 inches.

TABLE 4 E F G H BASF Urethane Elastoflex Elastoflex Elastoflex Elastoflex System 25066R 25066R 25063R 25063R C. O. R. 0.440 0.440 0. 470 0.470 MixRatio 100/71. 5- 100/75. 0- 100/66. 0- 100/69. 0- 100/72.0 100/75.5 100/66.5 100/69.5 Mold Size 88. 5 mm 88.5 mm 88.5 mm 88.5 mm Sanded Core 115-120 grams 115-120 grams 115-120 grams 115-120 grams Weight Size Range of 3.410-3. 430" 3. 410-3. 430" 3. 410-3. 430" 3. 410-3. 430" Sanded Cores [0042] Based on test results of the central cores 12, core types F and H were selected to have the outer mantle layer 14 molded over them. The outer mantle layer 14 was molded on the central core 12 using 94.2 mm molds with the modified pins. The outer mantle layer 14 was molded to have a thickness of about 0. 125 to 0. 135 inches. All mantle 14, 15 layers were molded using BASF's Elastocast urethane system. Composite covers 16 were then stitched over the multi-layer cores 11 to produce finished softballs for testing. The cores 12 and finished balls 10 were tested for size, weight, compression, COR and durability, and results are shown in TABLES 5 to 7 below.

TABLE 5 Central core'F' (. 44 COR Central core-88. 5 mm Mold) With Elastocast Outer Layer I i I Centr Mantle Layer Core Weight Size Pole Size Eq. Comp. Comp. Eq. al core No. (g) (in) (in) Pole (lbf) (Ibf) F Elastocast 1 160.8 3. 668 3.680 320.3 295 F ElastocastTM 2 160.5 3.658 3.681 340.0 311.4 F ElastocastTM 3 158.9 3.661 3. 671 300.1 280.5 F ElastocastTM 4 159.1 3.658 3.672 364.7 317.8 F ElastocastTM 5 163.6 3.669 3.677 323.6 323.3 F ElastocastTM 6 163. 5 3.663 3. 682 313.6 296.4 Ave. 161.1 3.663 3.677 315.6 Centr Mantle Layer Core COR @ COR @ COR @ Durability al core No. 40 mph 60 mph 80 mph F Elastocast | 1 0.518 0.459 0. 425 185 Blows F ElastocastTM 2 0.520 0.459 0. 427 185 Blows F Elastocast 3 0.520 0.455 0.425 Ave. 0.519 0.458 0.426 0. 44 COR Control WS-12RF80 Ball# Weight Size Size Eq. Comp. Comp. COR @ COR @ Pole (in) Pole Eq. 40 mph 60 mph (in) 1 146.9 3.660 3.687 404.6 422.4 0.478 0.429 2 145.9 3.662 3.673 391.3 405.2 0.472 0.425 3 146.0 3. 651 3.677 407.8 411.6 0.478 0.423 Ave. 146.3 3.658 3. 679 407. 2 0. 476 0.426 TABLE 6 Central core'H' (0.47 COR Central core-88.5 mm.

Mold) With BASF Outer Layer Central Mantle Core Weight Size Size Comp. Comp. Eq. (Ibf) core Layer No. (g) Pole Eq. Pole (in) (in) (Ibf) H Elastocast 1 160. 8 3.663 3.675 347.0 299.4 TM H Elastocast 2 158. 4 3.667 3.678 299. 8 269. 6 TM H Elastocast 3 160. 6 3.665 3.678 315. 5 280. 6 TM H Elastocast 4 160.1 3. 666 3.675 325. 7 291. 4 TM H Elastocast 5 162. 3 3.679 3.677 339. 9 292. 1 TM H Elastocast 6 162. 8 3.668 3.675 336. 8 298. 7 TM Ave. 160. 8 3. 668 3.676 308.0 Central Mantle Core COR @ COR COR @ 80 Durability core Layer No. 40 mph @ 60 mph mph H Elastocast 1 0.527 0. 475 0.442 185 Blows TM H Elastocast 2 0. 530 0.479 0. 439 185 Blows TM H Elastocast 3 0. 530 0.479 0. 441 TM Ave. 0.529 0. 478 0.441 0. 47 COR Control-WT-12RF Ball # Weight Size Size Eq. Comp Comp. COR COR @ COR Pole (in) # Pole Eq. @ 40 60 mph @ 80 (in) mph mph 1 145. 5 3.680 3. 680 454.6 434. 6 0. 520 0. 466 0.435 2 146.4 3.680 3.680 429.0 438.1 0.524 0.471 0.434 3 146. 8 3.675 3. 683 421.8 434.0 0.514 0.465 0.434 Ave. 146.2 3.678 3.681 435. 4 0. 519 0. 467 0.434 TABLE 7 Multi-Layer; Variation F Central core / ElastocastTM Outer Layer - 0.44 COR-White ZN Composite Cover Ball No. Weight Size Size Comp. Comp. COR Durability (g) Pole Eq. Pole (Ibf) Eq. (Ibf) (in) (in) 1 186.3 12"11 251.4 277.9 0.465 185 Blows 15/16" 2 183.6 11 11 274.8 269.6 0.458 Good 15/16"15/16" 3 185.5 11 12"239.8 245.5 0.459 15/16" Ave. 185.1 11 11 259.8 0.461 15/16" 15/16" A dozen of these balls were used in the player test. During the test, the athletes put 8 to 80 blows on each ball. Two of these balls were then subjected to 185 blows in the Spalding pound test machine in 30 blow increments. The balls held up well and did not show any significant out of round. D. 44 COR Control-WS-12RF80 Ball No. Weight Size Size Comp. Comp. COR Durability (g) Pole Eq. Pole (Ibf) Eq. (Ibf) (in) (in) 1 186.8 12"12"381. 4 378.6 0.418 2 184.9 12"12"384. 8 379.9 0.417 3 185.5 12"12"393. 3 386.6 0.419 Ave. 185. 7 12"12"384. 1 0. 418 N/A Multi-Layer: Variation H Central core / ElastocastTM Outer Layer - 0.47 COR-yT'Itite ZN Composite Cover Ball No. Weight Size Size Comp. Comp. COR Durability (g) Pole Eq. Pole (Ibf) Eq. (Ibf) (in) (in) 1 186.9 11 11 226.8 239.2 0.476 185 Blows 15/16"15/16" 2 186.3 11 11 242.2 238.5 0.475 Good 15/16"15/16" 3 184.5 12"11 237.5 226.7 0.479 15/16" Ave. 185.9 11 11 235.2 0.477 15/16"15/16" A dozen of these balls were used in the player test. During the test, the athletes put 8 to 80 blows on each ball. Two of these balls were then subjected to 190 blows in the Spalding pound test machine in 30 blow increments. The balls held up well and did not show any significant out of round. 0. 47 COR Control--WT-2RF Ball No. Weight Size Size Comp. Comp. COR Durability (g) Pole Eq. Pole (Ibf) Eq. (Ibf) (in) (in) 1 187. 9 12"12"451. 9 453.5 0.464 2 190.0 12"12"444. 4 429.0 0.462 3 188.6 12"12"445.7 424.3 0.463 Ave. 188.8 12"12"441. 5 0. 463 N/A [0043] The final softballs 10 were then field tested to determine the playability of the new multi-layer softball 10 of the invention. The focus of the field test was to obtain feedback on the feel, performance, sound, flight characteristics, distance, durability, and consistency of the product verses a comparable Dudley control softball. The players that participated in the trial were AA-Majors competitive level players. Field test results are shown below in Tables 8 to 10.

Tables 8 and 9 show individual hitting and distance results using the 0.44 COR and 0.47 COR softballs, and Table 10 shows the combined distance results from all participants for both types of softballs. The field test procedure used is as follows : [0044] Players warmed up with the test balls 10. Players were asked to comment on the feel of the ball 10 during the throwing and catching session by answering several questions about the feel of the ball 10. Following the informal throwing portion of the test, each player participated in the batting portion of the study. Each player took 24 swings per round with two to four rounds per athlete. The multi-layer softballs 10 and the control softballs were pitched in somewhat random fashion so that each player hit 6 controls, 6 multi-layers, 6 controls, and then 6 multi- layers. All balls hit over a minimum distance of 300 feet as determined by a range finder (Bushnell Yardage Pro range finder) were recorded. The 300 foot distance is a means of controlling the flight trajectory of the hit ball when tabulating and comparing distance measurements for each type of ball, and it groups the distance data and allows for better statistical representation. Hits that did not travel the required minimum distance were omitted.

Ground balls were designated'GND', l ine drives were denoted'LNR', and pop ups were labeled 'POP'. Each athlete was asked to provide feedback on the feel of the ball off the bat, the flight of the ball, the sound of impact, and the consistency of the product from swing to swing using the following questions: How did the ball feel during the throwing and catching portion of the test? Did the ball feel like a traditional softball ? How did the ball feel upon impact with the bat? Did the ball feel solid upon impact ? How would you rate the liveliness of the new product verses the Dudley control? Did the bal I jump off the bat? Did the new product sting less, more or the same as the control ball when you hit it? How did the new product sound when it was struck (i. e. , crack off the bat)? Was it any different than the control ball ? If so, do you think the sound was acceptable? How was the flight path of the new product verses the control? Did the ball fly straight after contact? Was there any excessive knuckling of the ball through the air? How would you rate the distance of the new product verses the control? TABLE 8 0. 44 COR vs. Control-Individual Distances Recorded Test Prod. Multi-Layer Softballs Controls Dudley Thunder Heat White ZN Composite WS-12RF80 Poly Core Cover Gold Stitch Synthetic Cover, Gold Stitch COR 0. 44 COR 0. 44 l Comp. ~385 Ibs. l Test Site Soddy Daisy, TN Field South Park Weather 85°F, Sunny, Relatively No wind Date Sunday June 16, 2002 Player # 1 Player # 2 Bat Type Mizuno Rage 28 oz Bat Type Easton Trishell 30 oz. Ball Control 0. 44 Multi-Layer Ball Control 0. 44 Multi-Layen Number Number 1 GND 3061 POP 330 2 LNR GND 2 LNR POP 3 POP 378 3 POP 324 4 GND 300 4 POP LNR 5 POP 318 5 360 381 6 387 390 6 309 LNR 7 POP 384 7 POP LNR 8 POP GND 8 303 393 9 384 330 9 POP 300 10 300 402 10 GND 315 11 303 381 11 312 300 12 303 381 12 POP 318 Average 335.4 357 Average 321 332.6 Distance Distance Std. Dev. 45.76 38. 78 Std. Dev. 26.27 35.29 Longest 387 402 Longest 360 393 Hit Hit Ave of Top 358 392 Ave of 327 368 3 Hits Top 3 Hits Notes: Notes: No significant out of round or denting on the balls No significant out of round or denting on after testing. the balls after testing. Player # l Player # Bat Type Worth PST 28 oz. Bat Type Worth PST 137 28 oz and Mizuno Techfire Ball Control 0. 44 Multi-Layer Number Number 1 GND GND 1 POP 387 2 GND LNR 2 363 POP 3 324 LNR 3 324 321 4 POP GND 4 372 GND 5 LNR GND 5 330 LNR 6 318 345 6 306 384 7 LNR 330 7 309 GND 8 LNR 324 8 LNR 390 9 GND LNR 9 324 306 10 387 LNR 10 LNR LNR 11 345 336 11 318 306 12 LNR LNR 12 312 333 Average 343.5 333.8 Average 328.7 346.7 Distance Distance Std. 31. 22 8.96 Std. 23. 44 38. 84 Deviation Deviation Longest 387 345 Longest 372 390 Hit Hit Ave of Top 352 337 Ave of 355 387 3 Hits To 3 Hits Notes: Notes: No significant out of round or denting on the balls No significant out of round or denting on after testing. the balls after testing. Player # 5 Player # 6 Bat Type Worth PST 28 oz. Bat Type Worth PST 137 28 oz. Ball Control 0.44 Multi-Layer Ball Control 0.44 Multi- Number Number Layer 1 318 402 1 POP GND 2 345 327 2 POP 315 3 315 LNR3 318 GND 4 GND 408 4 396 312 5 GND 321 5 366 LNR 6 LNR LNR 6 375 LNR 7 321 390 7 369 375 8 342 381 8 381 LNR 9 POP 390 9 LNR 423 10 330 LNR 10 369 POP 11 GND 387 11 324 GND 12 372 387 12 324 GND 334. 7 377 Average 358 356 Average Distance Distance Std. 20.11 31. 18 Std. 28.46 53.12 Deviation Deviation Longest Hit 372 408 Longest Hit 396 423 Ave of Top 353 400 Ave of Top 384 371 3 Hits 3 Hits Notes: Notes : No significant out of round or denting on the balls No significant out of round or denting after testing. on the balls after testing. Player # 7 Bat Type Worth PST 137 28 oz. Ball # Control 1 0. 44 Multi-Layer 1 312 LNR Le end : 2 372 LNR GND=Grounder 3 318 POP LNR= Liner 4 357 GND POP=PopFl 5 375 390 6 384 306 7 363 372 8 354 LNR 9 369 366 10 378 408 11 306 378 12 315 321 Ave. Dist. 350. 3 363 Std. Dev. 29.03 36.70 Longest Hit 384 408 Ave of Top 378 392 3 Hits Notes: No significant out of round or denting on the balls after testing. Between 7 and 10 hits are on the balls up to this point.

TABLE 9 0.47 COR vs. Control Individual Distance Recorded Test Prod. Multi-Layer Softballs Control Dudley Thunder Heat White ZN Composite WT12-RF Poly Core Cover Red Stitch White Leather Cover, Red Stitch COR 0. 47 COR 0.47 Comp.#440 Ibs. Player # 1 Player # 2 Bat Type Worth PST 28 oz. Bat Type Worth Trishell 30 oz. Ball # Control 0.47 Multi-Layer Ball # Control 0.47 Multi-Layer 1 GND 378 1 315 GND 2 GND GND 2 318 POP 3 GND 312 3 327 345 4 Foul GND 4 POP 345 5 LNR 330 5 POP 366 6 LNR 363 6 330 336 7 312 FOUL 7 318 357 8 324 GND 8 GND POP 9 GND 399 9 LNR 369 10 360 375 10 POP 378 11 LNR 363 11 300 POP 12 GND 399 12 336 POP Ave. Dist. 332 364. 9 Ave. Dist. 320.6 356.6 Std. Dev. 24. 98 30. 76 Std. Dev. 11.80 15.24 Longest Hit 360 399 Longest 336 378 Hit Ave of Top 332 392 Ave of 331 371 3 Hits Top 3 Hits Notes : Notes : No significant out of round or denting on the No significant out of round or balls after testing. denting on the balls after testing. Player # 3 Player # 4 Bat Type Worth PST 28 oz Bat Type Mizuno Techfire Ball # Control 0.47 Multi-Layer Ball # Control 0.47 Multi-Layer 1 315 315 1 LNR 324 2 LNR LNR 2 327 327 3 LNR LNR 3 363 GND 4 336 369 4 345 315 5 372 LNR 5 321 318 6 363 405 6 327 336 7 360 POP 7 330 306 8 318 GND 8 LNR 336 9 LNR 354 9 318 LNR 10 345 GND 10 Foul 318 11 366 342 11 LNR POP 12 306 GND 12 318 345 Ave. Dist. 342.3 357 Ave. Dist. 331 325 Std. Dev. 24.71 33. 34 Std. Dev. 15.54 12.28 Longest Hit 372 405 Longest 363 345 Hit Ave Top 3 367 376 Ave Top 3 346 339 Hits Hits Notes: Notes : No significant out of round or denting on the No significant out of round or denting balls after testing. on the balls after testing. Between 8 and 10 hits per ball are on the balls up to this point. Player # 5Player # 6 Bat Type Worth PST 28 oz Bat Type Worth PST 137 28 oz Ball # Control 0.47 Multi-Layer Ball # Control 0.47 Multi- Layer 1 GND 402 1 GND 375 2 GND 393 2 LNR LNR 3 324 LNR 3 GND GND 4 321 LNR 4 LNR LNR 5 372 LNR 5 GND 375 6 306 369 6 LNR LNR 7 312 GND 7 LNR GND 8 324 324 8 LNR LNR 9 318 372 9 GND GND 10 POP 408 10 LNR GND 11 318 LNR 11 378 LNR 12 POP LNR 12 336 LNR Ave. Dist. 324 378 Ave. Dist. 357 375 Std. Dev. 20.18 30. 77 Std. Dev. 29.70 0.00 Longest Hit 372 408 Longest 378 375 Hit Ave Top 3 340 401 AveTop3 Hits Hits Notes: Notes : No significant out of round or denting on the No significant out of round or denting on balls after testing. the balls after testing. Player 4 7 Player # 8 Bat Type Worth PST 137 28 oz. Bat Type Mizuno Techfire Ball # Control 0.47 Multi-Layer Ball # Control 0.47 Multi- Laver 1 327 GND 1 363 366 2 321 336 2 LNR 327 3 GND 372 3 GND LNR 4 GND LNA 9 4 366 GND 5 399 LNR 5 GND LNR 6 369 390 6 LNR GND 7 LNR 393 7 LNR GND 8 GND 378 8 GND GND 9 336 POP 9 345 405 10 321 378 10 LNR GND 11 318 315 11 GND GND 12 315 LNR 12 318 LNR Ave. Dist. 338.3 366 Ave. Dist. 348 366 Std. Dev. 30.03 29. 24 Std. Dev. 22.05 39.00 Longest Hit 399 393 Longest 366 405 Hit Ave Top 3 368 387 Ave Top 3 358 366 Hits Hits Notes: Notes : No significant out of round or denting on the No significant out of round or denting on balls after testing. the balls after testing.

TABLE 10 Total Distance Statistics Test Products Multi-Layer Softablls Controls Dudley Thunder Heat White ZN Composite Cover WS-12RF80 Poly Core Gold Synthetic Cover, Gold Stitch Stitch COR 0. 44 COR 0. 44 Comp.-385 tbs. Test Products Multi-Layer Softballs Controls Dudley Thunder Heat White ZN Composite Cover WT12-RF Poly Core Red Stitch White Leather Cover, Red Stitch COR 0. 47 COR 0. 47 Comp. #440 Ibs. 0.44 COR Products 0.47 COR Products Hit Number Control 0. 44 Multi-Layer Hit Number Control 0. 47 Multi- Layer 1 396 423 1 399 408 2 387 408 2 378 405 3 387 408 3 372 402 4 384 402 4 372 399 5 384 402 5 369 399 6 381 393 6 366 393 7 378 390 7 363 393 8 375 390 8 363 390 9 375 390 9 360 378 10 372 390 10 360 378 11 372 390 11 345 378 12 372 387 12 345 378 13 369 387 13 336 375 14 369 387 14 336 375 15 369 384 15 336 375 16 366 384 16 336 372 17 363 381 17 330 372 18 363 381 18 330 369 19 360 381 19 327 369 20 357 381 20 327 369 21 354 378 21 327 366 22 345 378 22 327 363 23 345 375 23 324 363 24 342 372 24 324 357 25 330 366 25 324 354 26 330 345 26 321 345 27 324 336 27 321 345 28 324 333 28 321 345 29 324 330 29 321 342 30 324 330 30 318 336 31 324 330 31 318 336 32 321 327 32 318 336 33 318 324 33 318 336 34 318 324 34 318 330 35 318 321 35 318 327 36 318 321 36 318 324 37 318 321 37 318 324 38 315 318 38 315 318 39 315 318 39 315 318 40 312 315 40 315 315 41 312 315 41 312 315 42 312 312 42 312 315 43 309 306 43 306 312 44 309 306 44 306 306 45 306 306 45 300 46 306 306 47 303 300 48 303 300 49 303 300 50 300 Control 0. 44 Multi-Layer Control 0. 47ML Ave. Dist. 341 354 Ave. Dist. 333 357 All Hits All Hits _ Std. Dev. 30 37 Std. Dev. 23 29 Max. Dist. 396 423 Max. Dist, 399 408 Average of 390 413 Average of 383 405 Top 3 Hits To 3 Hits Average of 388 409 Average of 378 403 Top 5 Hits To 5 Hits Average of 382 400 Average of 370 395 Top 10 Hits Top 10 Hits Average of 378 395 Average of 360 388 Top 15 Hits 15 Hits Average of 374 392 Average of 353 384 Top 20 Hits To 20 Hits [0045] Additional testing was performed on another batch of softballs 10. The softballs 10 were constructed in the manner previously described at both the 0.44 and 0.47 COR levels. The central cores 12 were produced using urethane available in Taiwan under the designations T11- 0.40 and T11-0. 44 respectively. The central core 12 of the 0.44 COR multi-layer ball 10 was produced using a mix ratio of about 100/52, and the central core 12 of the 0.47 COR ball 10 was produced using a mix ratio of about 100/54. The thickness of the outer mantle layer 14 was 0.125-0. 135 inches, and the outer mantle layer 14 was molded using a mold size of 94.2 mm.

Mantle layers 14,15 for both balls 10 were molded using the BASF Elastocast 70018R system with WUC 3236T isocyanate. Measurements of the softballs were taken, and results are shown below in TABLES 11 and 12.

TABLE 11 0. 44 COR Multi-La er Finished Balls Made Finished Ball Dudley Thunder Advance MLT 12 44 White ZN Composite Cover 0.44 COR Version Core No. Size Pole Weight Comp. Comp. COR 30 Blow 185 Blow (in) (g) Pole Eq. Durability Durability (Ibf) (lbf) (60,90, 120) 1 12"182. 3 218.7 184.4 0. 445------------ 2 12"184. 3 267.8 261. 1 0. 438------------ 3 12"181.4 227.4 220. 8------Good after 30 blows 4 12"180. 2 230.4 239. 8------Good after Good-No Cracking 30 blows 5 12"186. 9 289.5 274. 7 Cover and Mantle Removed- Core Data Below 6 12"184. 0 263. 4 257. 0------Cover and------ Mantle Removed- Core Data Below 7 ------ ------ 256.30 228.30 ------ ------ ------ 8 ------ ------ 232.70 230.20 ------ ------ ------ 9 ------ ------ 282.70 257.60 ------ ------ ------ 9----282. 70 257. 60------ 11 269. 90 262. 60 11 ------ ------ 269.90 262.60 ------ ------ ------ 12 ------ ------ 206.90 217.50 ------ ------ ------ Average 12" 183. 2 249. 0 0. 442 Good Good Min. 0.000 180.2 184. 4 0. 438 Max. 0. 000 186.9 299. 8 0. 445 Cover to Mantle Adhesion was pretty good. The cover could be peeled without much force. Mantle to Core Adhesion was very good. Central core Data - Changes Over Time First Test Second Test (after 3 Third days) Test (after 1 week) Core Weight Comp. Comp. COR Comp. Comp. Eq. COR COR Number (g) Pole Eq. (Ibf) Pole (Ibf) (Ibf) (Ibf) 5 123.2 406.6 380.8 0.431 446.8 443.5 0.433 0. 433 6 120.6 372.7 392.8 0.429 418.0 424.6 0.431 0.436 Average 121.9 388. 2 0. 430 433. 2 0. 432 0.435 Completed Balls-Changes Over Time First Test Second Test (after 3 Third days) Test (after 1 week) Core Weight Comp. Comp. COR Comp. Comp. Eq. COR COR Number (g) Pole Eq. (Ibf) Pole (Ibf) (Ibf) (Ibf) 1 182.3 218.7 184. 4 0.445 234.5 197. 3 0.450 0. 443 2 184.3 267.8 261.1 0.438 293.0 281.5 0.439 0.435 7 ------ ------ ------ ------ 287. 3 258.2 0.439 0.438 8----------------------------262. 2 245.6 0. 440 0.438 Average 183.3 233. 0 0. 442 257. 5 0. 442 0.439 TABLE 12 Statics for 0. 47 COR Multi-Layer Finished Balls Finished Ball Dudley Thunder Advance MLT 12 RF White ZN Composite Cover 0.47 COR Version Core No. Size Pole Weight (g) Comp. Comp. COR 30 Blow 185 Blow (in) Pole (Ibf) Eq. (Ibf) Durability Durability (60,90, 120) 1 12" 181. 2 204.6 198.3 0. 445 ------ ------ 2 12"182.8 222.6 223.2 0. 446 ------ ------ 3 12"181.7 205.9 205.5 0. 448 ------ ------ 4 12"183. 2 208.9 202. 1------Good after Good 30 Blows 5 12"182.3 211. 7 206. 7 ------ ------ ------ 6 12"181. 8 211.8 222. 8 ------ ------ ------ Ave. 12"182. 2 210. 3 0. 446 Good Good Min. 0.000 181. 2 198. 3 0. 445 Max. 0.000 183.2 223. 2 0. 448 Original Data Dudley Thunder Advance MLT 12 44 White ZN Composite Cover 0.44 COR Version Core No. Size Pole Weight (g) Comp. Comp. COR 30 Blow 185 Blow (in) Pole (Ibf) Eq. (Ibf) Durability Durability (60,90, 120) 1 12"183. 8 229.7 222.4 0.455 Good Good 2 12"186. 7 230. 4 240.2 0.454 Good 3 12"183. 8 209. 4 223. 1------------------ 4 12"185. 4 249.1 205. 4 ------ ------ ------ 5 12"187.4 233.9 223. 4 ------ ------ ------ 6 12"180. 8 200.2 201. 8------ 7 ------ 181. 9 232.2 227. 7 ------ ------ ------- 8 ------ 183. 9 241.8 241. 7 ------ ------ ------ 9 186. 8 216.9 214. 9------ 10------186. 6 224.7 227. 8------ 11 ------ 184. 6 232. 7 237. 0 ------ ------ ------ 12 ------ 182. 3 207.8 212. 4------ Ave. 12"184. 5 224. 4 0. 455 Good Min. 0.000 180.8 200. 2 0. 454 Max. 0.000 187.4 249. 1 0. 455 [0046] The softballs 10 were tested in a manner similar to those tested in Example 2. There were 4 different balls tested: a control (Dudley Thunder SW-12RF80 Softball); the 0.44 COR version multi-layer ball 10 (Dudley Thunder Advance); the 0.47 COR version multi-layer ball 10 (Dudley Thunder Advance); and the 0.44 COR version of the multi-layer ball 10 of Example 2 (Dudley Innova). The Dudley Innova was used to compare the final version to the first version oi the multi-layer ball, which had a COR that was slightly high. Each player was asked to take 24 swings per round, with two rounds. The four ball types were pitched in random fashion, with each player hitting 6 balls of each type before moving to the next ball type. The Dudley Innova balls were later removed as players began to tire. All distances over 225 feet were recorded, in the same manner as the previous test. Test data on the four balls types is shown in TABLE 13 below. Results of the test are shown below in TABLE 14.

TABLE 13 Static Summary for Balls Used in Player Test (tested prior to test) A Dudley Thunder Heat CONTROL BALL SW-12RF80 Poly Core Synthetic Cover, Gold Stitch COR 0.44-Control Sample Size (in) Weight Comp Pole Comp Eq. (Ibs) COR ID (ìbs) A 12 183.5 373.7 379.3 0.427 A 12 184.8 380.7 386.3 0.413 A 12 187.0 378. 4 382. 1----------- A 12 185.9 375.7 387. 6----------- A 12 183.9 378.8 405. 6----------- A 12 186.9 387. 1 393. 5---- Average 12 185. 3 384. 1 0. 420 Central core Weight is 142.6 grams (based on 2 cores). Central core Compression is 437 Ibs (based on 2 cores). Central core COR is. 436 (based on 2 cores). B Multi-Layer Softballs : Dudley Thunder Advance White ZN Composite Cover Gold Stitch COR 0.44 Sample Size (in) | Weight Comp Pole Comp Eq. (Ibs) COR ID lbs B 12 185.1 283.1 279. 5 0.437 B 12 184.3 211.2 206.3 0.438 B 12 182.2 328.3 309. 7 ----------- B 12 183. 1 270.6 257. 6 ----------- B 12 187.1 274.0 271. 2----------- B 12 187.6 322.5 303. 1 ----------- Average 12 184.9 276. 4 0. 438 Central core Weight is 121.4 grams (based on 2 cores). Central core Compression is 457.9 Ibs (based on 2 cores). Central core COR is. 433 (based on 2 cores). Mantle Weight is 158 grams (based on 2 mantles). Mantle Compression is 319 Ibs (based on 2 mantles). Mantle COR is. 437 (based on 2 mantles). C Multi-Layer Softballs : Dudley Innova White ZN Composite Cover Gold Stitch COR 0.44 Sample Size in Weight Comp Pole Comp Eq. (lbs) COR ID ( ! bs) C 12 184. 8 299.3 305.9 0.467 C 12 184.4 315. 6 319. 0 C 12 182.9 358. 3 359.7 ----------- C 12 182. 5 318.7 283. 6 ----------- C 12 184.4 343.4 309. 4 ----------- C 12 181.4 333.3 368. 6 ----------- Average 12 183. 4 326. 2 0. 467 Central core Weight is 118 grams (based on 1 core). Central core Compression is 667 lbs (based on 1 core). Central core COR is. 467 (based on 1 core). Mantle Weight is 163.4 grams (based on 1 mantle). Mantle Compression is 472 Ibs (based on I mantle). Mantle COR is 468 (based on 1 mantle). D Multi-Layer Softballs : Dudley Thunder Advance White ZN Composite Cover Red Stitch COR 0.47 Sample Size (in) Weight Comp Pole Comp Eg. (Ibs) COR ID Ibs D 12 180. 6 229. 9 234.0 0.452 D 12 181.7 240.8 226.0 0.448 D 12 182. 2 233. 2 232. 0----------- D 12 181.3 221. 5 221. 8---- D 12 181. 2 208.7 210. 0----------- D 12 179.5 222.5 226. 4 ----------- Average 12 181.1 225.6 0.450 Central core Weight is 116.2 grams (based on 1 core).

Central core Compression is 530. 1 Ibs (based on 1 core).

Central core COR is. 442 (based on 1 core).

Mantle Weight is 158.9 grams (based on 2 mantles).

Mantle Compression is 319 bs (based on 2 mantles).

Mantle COR is. 449 (based on 2 mantles). TABLE 14 Individual Recorded Distances A. B Control (Standard 12"Multi-Layer Softballs : Ball (no Urethane core) Dudley Thunder Advance mantle (core and mantle layer) layer) Dudley Thunder Heat White ZN Composite Synthetic Cover, Gold Stitch Cover, Gold Stitch COR 0.44 COR 0.44 Comps. #385 lbs. CD Multi-Layer Softballs : Multi-Layer Softballs : Dudley Innova Dudley Thunder Advance White ZN Composite Cover White ZN Composite Cover Gold Stitch Red Stitch COR 0. 44 COR 0. 47 Summary-Distance In Feet A B C D Ball Number SW-12RF80 Thunder Innova MLT Thunder Control Advance : 44 Advance MLT 44 MLT 47 1 354 387 381 363 2 345 387 381 357 3 342 378 369 348 4 336 366 357 345 5 330 360 354 345 6 327 354 351 342 7 327 345 333 342 8 321 345 333 336 9 321 342 333 333 10 318 336 327 333 11 318 327 327 333 12 318 327 324 324 13 315 324 321 324 14 312 324 315 321 15 309 324 309 318 16 309 324 303 315 17 309 321 300 315 18 306 321 297 306 19 303 318 285 306 20 300 318 279 306 21 300 315 276 306 22 297 315 273 303 23 297 312 264 303 24 294 312 264 303 25 294 312 264 303 26 294 312 261 300 27 294 312 258 297 28 288 306 252 297 29 285 303 252 294 30 285 300 246 294 31 282 300 240 294 32 279 300 234 294 33 279 300 234 291 34 279 300 234 285 35 276 297 231 285 36 276 297 228 285 37 276 294 228 285 38 273 294 228 282 39 273 294 225 282 40 272 294 225 282 41 270 294 ----------- 279 42 270 291 ---------- 279 43 270 291 ----------- 276 44 267 291-----------276 45 267 288 ----------- 276 46 264 276-----------276 47 264 276 276 48 264 276 ---------- 273 49 264 273 ----------- 273 50 261 270-----------273 51 258 270 ----------- 273 52 258 270-----------273 53 258 270 ----------- 273 54 258 267 ----------- 270 55 256 264-----------270 56 255 261-----------267 57 252 261-----------264 58 252 258-----------261 59 252 258-----------261 60 249 258-----------258 61 249 258 ----------- 258 62 246 255 ----------- 252 63 246 255-----------252 64 243 255 ----------- 252 65 243 252-----------252 66 240 252-----------252 67 240 252-----------252 68 240 249 ----------- 252 69 240 249-----------249 70 234 249 ----------- 249 71 234 249 ----------- 249 72 234 249 ----------- 249 73 228 246-----------249 74 228 246-----------246 75 228 246-----------243 76 225 243 ----------- 240 77 225 243 ----------- 240 78 225 240-----------237 79 ----------- 240 ----------- 237 80 ----------- 237 ----------- 234 81 ----------- 234 ----------- 234 82 ----------- 234 ----------- 231 83 ----------- 234 ----------- 231 84 ----------- 228 ----------- 228 85 ----------- 225 ----------- 225 86 ----------- 225 ----------- ----------- SW-12RF80 Thunder Innova MLT Thunder Control Advance MLT 44 Advance 44 MLT 47 Ave. Dist. all 277 287 287 282 Hits Standard 32.88 39.53 48.37 34.18 Dev. Max. 354 387 381 363 Distance Hit Average of 347 384 377 356 Top 3 Hits Average of 341 376 368 352 Top 5 Hits Average of 332 360 352 344 Top 10 Hits Average of 326 348 341 338 Top 15 Hits Average of 321 341 329 331 Top 20 Hits Average of 316 336 317 325 Top 25 Hits Average of 312 331 306 320 Top 30 Hits Average of 303 322 287 312 Top 40 Hits [0047] The results of the player test were very positive. Both versions of the multi-layer softball 10 unexpectedly performed better than the comparable control softball, and the new multi-layer softballs 10 have a compression of over 100 lbs. lower than the conventional control softball, which has no core/mantle layers. Both of the new multi-layer softballs 10 were longer off the bat, as shown in TABLE 14. Player perception was also positive, with most players stating that the sound off the bat was equal to that of the control ball, and most players felt that the multi-layer softballs were livelier than the control balls offthe bat. The multi-layer softball 10 allows for a significantly lower overall compression while maintaining or even improving the performance of the ball 10.

[0048] A pilot run of multi-layer softballs 10 was completed for further testing. The balls 10 were tested to determine physical properties. Results of the test are shown in TABLES 15 and 16 below.

TABLE 15 Statics for 0.44 COR Multi-Layer Central cores Central core Tel 1-0. 40 COR Standard Mix Ratio Purple Central cores Mold Size-88.5 mm Sanded Weight Range 115-120 g Central core Data Core Size Weight Comp. Comp. COR 30 Blow 185 Blow No. Pole (in) (g) Pole Eq. Durability Durability (lbf) (Ibf) 1 3.42 118.2 385.2 375.6 0. 428 ------ ------ 2 3.42 115.8 367.3 375.9 0. 432---- 3 3.41 115.7 383.2 387. 7------Good-No Look Good Significant Denting 4 3.41 114.8 376.0 381. 2------Good-No Look Good Significant Denting 5 3.41 115. 8 389. 7 384. 9------ 6 3.41 117.3 388. 1 397. 6------ 7 3.42 116.0 386. 0 389.4 ------ ------ ------ 8 3.41 115. 2 380. 6 385. 6 9 3.42 117. 1 393. 0 408. 7 ------ ------ ------ 10 3.41 117.0 393.3 395. 2 ------ ------ ------ 11 3.41 115.1 386.1 383. 4 ------ ------ ------ 12 3.41 114.8 375. 9 385.0 ------ ------ ------ Ave. 3.41 116. 1 385. 6 0. 430 Good Good Min. 3.41 114.8 367. 3 0. 428 Max. 3.42 118.2 408. 7 0. 432 TABLE 15 (continued) Central core Data - Over Time Original Data Tested after 1 week Core Weight Comp. Comp. COR Comp. Comp. Eq. COR No. (g) Pole (Ibf) Eq. Pole (Ibf) I (lbo (Ibf) 1 118.2 385. 2 375.6 0.428 422.8 419.5 0.432 2 115.8 367. 3 375.9 0.432 398.7 393.1 0.434 5 115.8 389. 7 384. 9 417. 9 411. 9 0.429 6 117.3 388. 1 397. 6------420. 1 426.0 0.431 7 116.0 386.0 389. 4 ------ 407. 6 418. 1 ------ 8 115.2 380.6 385. 6 ------- 417. 9 408. 1 ------ 9 117.1 393.0 408. 7 ------ 416. 5 427. 1 ------ 10 117.0 393.3 395. 2 ------ 424. 9 422. 7 ------ 11 115. 1 386.1 383.4 ------ 413.5 415. 6 ------ 12 114.8 375.9 385. 0 ------ 402. 3 413. 2 ------ Ave. 116. 2 386. 3 0. 430 414. 9 0. 432 3 weeks Core Comp. Comp. COR No. Pole (Ibf) Eq. (Ibf) 7 388.6 389 0.425 8 394.6 379. 8 0.425 9 393 400. 8 ------ 10 394.5 396. 1 ------ 11 390.1 385. 9 ------ 12 371. 4 381. 8------ Ave. 388. 8 0. 425 TABLE 16 Statics for 0.44 COR Multi-Layer Finished Balls Mantle LaE ! Li Yearflow's Modified D-12 Softie System Mold Size 94.2 mm Outer Layer Thickness 0.125- 0.135" Finished Ball Dudley Thunder Advance MLT 12 44 White ZN Composite Cover 0.44 COR Version Finished Ball Data Ball Size Weight Comp. Comp. COR 30 Blow 185 Blow No. Pole (in) (g) Pole Eq. Durability Durability (Ibt) (Ibf) 1 11 181.4 190.6 171.2 0. 422 ------ ------ 15/16" 2 12"185.3 213.0 207.2 0. 431 ------ ------ 3 12"1843 225.7 224.6 0. 431 ------ ------ 4 12"184. 4 231.0 212.6 0. 428 ------ ------ 5 12"181. 8 198. 1 185. 5 ------ ------ ------ 6 12"180. 5 178.8 181. 3 ------ ------ ------ 7 ------ 180. 1 204.0 196. 7------ 8 182. 4 230.2 207. 7 ------ ------ ------ 9 ------ 182. 3 188.5 196. 1 ------ ------ ------ 10 ------ 183. 4 203.4 198. 8------ 11------184. 1 191. 7 224. 5------Good-No Good Significant Denting 12 ------ 182. 0 197.1 210. 9------Good-No Good Significant Denting Ave. 12"182. 7 202. 9 0. 428 Good Good Min. 11 180.1 171.2 0.422 15/16" Max. 12"185. 3 231. 0 0. 431 Finished Ball Data-Over Time Original Data After 1 week Ball Weight Comp. Comp. COR Comp. Comp. Eq. COR No. (g) Pole Eq. Pole (Ibf) (Ibf) (Ibf) (lbf) 1 181. 4 190.6 171.2 0. 422 172.9 160.9 0.414 2 185.3 213.0 207.2 0.431 200.4 187.0 0.432 5 181.8 198.1 185. 5 ------ 197. 3 191.6 0.428 6 180.5 178.8 181. 3------175. 3 183.3 0.429 7 180.1 204.0 196. 7 ------ 199. 0 197. 8 ------ 8 182.4 230.2 207. 7 ------ 229. 8 210. 3 ------ 9 182.3 188.5 196. 1------189. 3 195. 8 ------ 10 183.4 203.4 198. 8 ------ 201. 3 193. 8 ------ 11 184.1 191.7 224. 5------195. 8 223. 5 ------ 12 182.0 197.1 210. 9 ------ 200. 5 213. 2 ------ Ave. 182.3 198. 8 0. 427 195. 9 0. 426 After 2 weeks Ball No. Comp. Comp. COR Pole Eq. (Ibf) (Ibf) 5 201.8 191. 2 ------ 6 176.1 184. 4 ------ 7 218.1 208.6 0.426 8 252.5 225.9 0.430 11 208. 9 257.8 ------ 12 213.2 231.5 ----- Ave. 214. 2 0. 428 1 1 1-1 [0049] The foregoing description is, at present, considered to be the preferred embodiments of the MULTI-LAYER SOFTBALL. However, it is contemplated that various changes and modifications apparent to those skilled in the art may be made without departing from the present invention. Therefore, the foregoing description is intended to cover all such changes and modifications encompassed within the spirit and scope of the present invention, including all equivalent aspects.