| Document |
Document Title |
|
JP2003029318A |
To provide a shutter mechanism for camera capable of opening/closing a shutter blade after switching a diaphragm in accordance with subject luminance with a simple constitution.When a shutter button 27 is somewhat pressed in, a release l...
|
|
JP2003029324A |
To prevent the generation of any waste of film even when a film cartridge is loaded in an abnormal rotating position and to always carry out an exposure operation based on correct DX information.In the camera, 2 pattern codes (DX1 and DX...
|
|
JP2003029311A |
To obtain a photographing equipment such as a film unit with lens in which a user can discriminate what state an exposing condition is set to even in a state where a the user holds the back surface of the photographing equipment.The phot...
|
|
JP2003029381A |
To provide a radiographic imaging assembly effective in portal imaging under various exposure conditions.The radiographic imaging assembly includes a high contrast first silver halide radiographic film disposed in association with a low ...
|
|
JP2003026113A |
To provide a simply structured packaging device which efficiently, satisfactory and in simple process winds a packaging sheet around the outer periphery of a roll-shaped item.This packaging device 50 is provided with a shading leader car...
|
|
JP2003029319A |
To allows a kick type shutter device to obtain a stable shutter speed with a small individual body difference.A cam hole 78e formed in a shutter driving lever 78 and a connecting pin 76 formed on a sector lever 76 engage each other. The ...
|
|
JP2003029382A |
To provide a silver halide photographic sensitive material having the form of a light shielding roll in which photographic properties are hardly affected in a long-term storage.The silver halide photographic sensitive material having the...
|
|
JP2003026173A |
To provide a film case capable of improving convenience in a portable state under application of this film case for carrying chalk and further capable of performing both storing of a film container and storing of the chalk in response to...
|
|
JP2003029383A |
To decorate the surface of a frame embracing the periphery of the print surface of a positive image without considerably modifying a conventional instant film manufacturing process.White plain first to third color layers 30a-30c are disp...
|
|
JP3370202B2 |
|
|
JP3371286B2 |
|
|
JP3371405B2 |
A film cartridge which can be looked up easily and a film image input system which can obtain a high quality image by using the film cartridge wherein the image signal of each frame image, of which the image quality is adjusted, is recor...
|
|
JP3371259B2 |
|
|
JP3370794B2 |
A sheet film pack has a pack housing for receiving a plurality of sheet film units in a stack, and a lid for closing an opening of the pack housing, through which a topmost sheet film unit of the stack is placed in an exposure position. ...
|
|
JP2003021887A |
To provide an instant photographic film unit constituted so that an image plane part does not have a level difference in thickness and blur or a black point is not caused around an image plane frame.This film unit is a mono-sheet type in...
|
|
JP2003021888A |
To reduce man-hour, cost and waste concerning the manufacture of the label of a photographic film cartridge and to shorten manufacture lead time so as to easily switch manufacturing kinds.A blank label only stamped and slitted is supplie...
|
|
JP2003502684A |
A camera for making pseudo-photographic images has a series of viewfinder masks that define various fields of vision and a series of light-pipe masks that selectively block the passage of light through two light pipes disposed within the...
|
|
JP3368979B2 |
|
|
JP2003015187A |
To provide photographing equipment by which the need of moving a diaphragm and a shutter blade to an optically inappropriate position is eliminated without deteriorating moldability even though the aperture part of a photographic lens ho...
|
|
JP2003015262A |
To maintain moisture-proof property inside a camera.The camera 3 packed in a transparent gusset bag 15 and several film packages 4 are integrally packed in a blister package 5. A film cartridge is previously loaded into the camera 3, and...
|
|
JP2003015204A |
To provide a device for opening and closing a cartridge chamber cover which enables prevention, etc., of damage of parts of a camera body caused by the excessive pressing of the cartridge chamber cover by a user by enabling the detection...
|
|
JP2003015263A |
To provide the collection support system/method of a lens-fitted photographic film unit which give incentive with respect to collection to a laboratory and can efficiently collect a body for a circular production factory.In the collectio...
|
|
JP2003015261A |
To provide a packaging material for a heat developable recording material having such an excellent barrier property as not to cause a density change even when the heat developable recording material in the form of processed goods is stor...
|
|
JP3367351B2 |
|
|
JP3367352B2 |
|
|
JP2003005257A |
To provide a system and a method for controlling the limit of reloading film for a camera which can be used even by a user having no expert knowledge on the camera and effectively used by accurately judging the time limit of using the ca...
|
|
JP2003005328A |
To prevent the adhesion of dirt to an instant film discharged as well as to prevent light fog due to the penetration of outside light.A light shielding flap 20 is produced by dry laminating using a transparent polyethylene terephthalate ...
|
|
JP2003002543A |
To provide a winding core for a photograph photosensitive material having an excellent automatic winding property and reducing a failure in winding.On this winding core for the photograph photosensitive material, a band type photograph p...
|
|
JP2002372772A |
To optimize the quality of an image, as to the combination of a film and a camera. The developing system is provided with a reading unit 2 for detecting a unitary bar code on the film for specifying the combination of the film and the ca...
|
|
JP2002372770A |
To enable quickly finding the display position of the number of photographing times, and to enhance the visibility of the display. A counter disk with marks 30a is covered with a transparent top plate 29 where a lens part 37, an index 38...
|
|
JP2002372768A |
To easily load a paper magazine with a paper roll. The paper magazine is provided with a roll supporting shaft 20 to be inserted into a central hole section H of the paper roll R and a pair of the side walls facing each other of a magazi...
|
|
JP2002372737A |
To correct parallax by a see-through type finder device and to confirm a focusing state at close-up-photographing. A close-up lens 13 is integrally arranged with a lens holder 53 which is arranged so as to be freely rotated in a plane ve...
|
|
JP2002372769A |
To provide a paper magazine which is capable of preventing paper from being damaged and noises and vibrations from being generated, further can be downsized in an electric motor for driving the conveyance of the paper even if the cycle t...
|
|
JP2002372771A |
To reduce members to be discarded, as to film unit packing material. A film is previously loaded to the film unit 10, and the unit 10 is provided with a photographic lens, a strobe light emitting part 13 and the like necessary for photog...
|
|
JP3359184B2 |
PURPOSE: To perform the various kinds of test operation for a device without preparing many film cartridges in a specified film state nor resetting them in the specified film state by means of an exclusive tool by using any film cartridg...
|
|
JP3359952B2 |
|
|
JP2002368973A |
To easily create a photograph to which a decorative image can be composited. On a photographic film loaded in a film unit with a lens, a template composition code specifying a template is magnetically recorded during the manufacture. Whe...
|
|
JP2002368922A |
To provide a system that can simply obtain composite image data comprising a decorative image and a photographed image and photographed image data to which a moving picture and music data are attached. A designation code to designate dis...
|
|
JP2002365694A |
To make the delay time of shutter release constant. When a shutter button is pressed, a pressing piece 27a presses a release part 76c in a rightward direction so that a winding stop lever 76 is rotated counterclockwise. By such rotation,...
|
|
JP2002365702A |
To prevent a user from getting an electrical shock by preventing a film unit equipped with a lens from electrically communicating with a stroboscopic device. The strobe light emitting part 7 of the stroboscopic device 17 is constituted o...
|
|
JP2002365712A |
To provide a camera apparatus which is inexpensive, is simple in structure and is installed in all places to photograph persons intruding into monitor regions. A shutter activating mechanism 10 is built to a film housing box 6 which hous...
|
|
JP2002365773A |
To provide a lens-fitted photographic film unit constituted so that a name and a mark showing a manufacturing company may be easily and inexpensively changed to that of another company. A projecting logotype 17 is formed on a front cover...
|
|
JP2002365771A |
To prevent a waterproof case for a film unit equipped with a lens from being soiled by a cosmetic sticking to the case. The waterproof type lens-fitted photographic film unit 1 is constituted by covering the unit main body 3 with a cover...
|
|
JP2002365755A |
To provide a light shielding photosensitive material roll in which a light shielding leader is less liable to slip from a photosensitive material roll in preservation and a photosensitive material sheet can easily be drawn after loading ...
|
|
JP2002365691A |
To provide an easily attachable small photometry device which accurately measures a received light quantity. The photometry device is provided with a light-shielding cap 45 which integrally connect an element cover 43, a first light-shie...
|
|
JP2002365772A |
To provide a label sticking method for lens-fitted photographic film unit which can be easily disassembled. The lens-fitted photographic film unit 2 is constituted of the unit main body 3 and an outer packaging label 4 stuck to the circu...
|
|
JP2002365692A |
To obtain a photographic image whose quality is hardly deteriorated. When a film cartridge is loaded, the manufacturing date and the nominal sensitivity of photographic film are inputted into the camera. In the case of photographing, the...
|
|
JP2002365709A |
To improve the assembly workability in manufacturing a camera with a diaphragm selecting device. A lens unit 52 selects a diaphragm by inserting and removing a small diaphragm opening 62a of a movable diaphragm plate 62 fixed to a diaphr...
|
|
JP2002365768A |
To make possible even for a vision-impaired person to easily store and arrange photographic prints. Information on Braille print conduct showing whether or not photographing information on photographing year and date 62 should be written...
|
|
JP2002362513A |
To provide a packaging body production system and a packaging body production method of a sheet which can automate a production work, efficiently produce the packaging body of the sheet, and prevent the performance of a photographic film...
|
