Technical Area

Invention, is about a camper that can be used four seasons outdoors by it’s target group; while supplying security and comfort for lodging; it can also be towed to the offroad by a motor vehicle, it is all terrain, it provides all essential needs in a practical way (bed, dining table, kitchen, WC, shower, fridge, heating), it is a lightweight and sturdy caravan.

Prior Art

In recent years, nature orientation and natural sports are rising trends. Therefore, number of hunters, amateur coastal fishermen, campers, nature explorers, offroad enthusiasts, trekkers, paragliders, wind surfers, kite surfers and skiers and their requirements in professional equipment are also increased. In addition to those groups, there is a vast number of weekend and regular travellers who explore new places and new cities.

Those dynamic and active group of people’s biggest problem is the accommodation at the travelled location. Because of the land conditions or high costs, accommodation facilities for nature tourism are inadequate in countryside. This factor is regarded as a direct handicap for free movement, and it limits the time spent in nature. Therefore, there is an incraeasing demand in satisfying basic accommodation requirements for nature lovers.

In the state of the art, large volumed conventional caravans that are suitable for summer conditions are widely produced and used. Their chassis consists of bended iron profile or iron box profile; frame structures are iron welded; galvanized coating method is used against corrosion and exterior is largely covered with fiberglass plates. Conventional caravans are very heavy because of their large volumes and iron frame stuctures. Heavy weight causes high fuel consumption of the towing vehicle, and difficulties in maneuvering in traffic. Therefore, those products are not convenient in frequent usage and require additional expertise for driving in the traffic.

Land use of this type of conventional caravans is much harder. Because they are close to the ground; long and flat tail section creates friction and obstruction on pits and bumps; it also creates maneuvering challenges on the rugged terrain. For this reason, their widespread use is usually in the summer at long-term summer camps and on asphalt terrain. Because it is difficult to maneuver and park in the city, it is very typical that they are transported and abandoned to a spare place for all their physical life.

Teardrop Caravans are an alternative class to conventional caravans, because they are lightweigt and easy to maneuver. Small mass and light weight increases the chance of land use of a caravan. But Teardrops are again only appropriate for summer or spring camps. They are made of iron chassis structure, heat isolation is not their priority, kitchen is located outside the trailer, they don’t have indoor WC and/or bathroom, and they are small. Due to their limited living spaces, these products are mostly used just for sleeping.

Another state of the art alternative is portable tent systems that can be attached to the ceiling or sides of a SUV. This type of products are far from providing required comfort. They can’t provide shower and toilet during long-term accommodation. It is very difficult to use them in winter conditions as they are not favorable for heat insulation.

An invention used in the state of the art is a utility model, entitled; “Modular Caravan Structuring for Lightweight Commercial Vehicles” and numbered TR2016/00928. The invention, which is applied to light-weight commercial vehicles is about the removal of the rear cargo section and installation of a caravan instead. Lightweight commercial vehicle’s cargo section is disassembled and a caravan is mounted on the chassis and then all internal equipment is assembled.

Another conventional technique is entitled“Caravan with expandable living space” It is a utility model, numbered TR2015/12661. It is a 4 square-meter truck when completely closed; it has 16 square-meter footprint caravan when opened, and it is not much different from a normal caravan. It allows a wide space. Although folding feature of the caravan provides advantages such as small footprint fabric and canvas used in folding parts does not provide sufficient heat-sound-water insulation in extreme winter conditions.

So far there has been no product manufactured or used as a caravan made of subject matter of the invention:“T-slot Aluminum Profile”

Objective Of The Invention

The invention’s structure is composed of high-strength aluminium material. It is developed for four seasons use in both normal road and off-road conditions. It is a lightweight and sturdy, practical offroad camping trailer that provides sufficient living space that can be varied and developed according to the needs of user groups.

An objective of the invention is remaining in the lowest weight class for towing caravans while providing adequate living space. Designing a 180 cm standing height, 180 cm wide bed section, and solving dining table- bed- kitchen- unit-shower- WC needs in the inner area at the same time is unique.

Another purpose of the invention is to provide comfort in extreme winter conditions with diesel fueled heating system and high-heat-water-sound insulation of the structure. In hot summer conditions, under the sun, by providing high protection and producing electrical power with solar panels, it consistently meets the lightening needs of users everywhere, even far from the cities.

Another objective of the invention is to provide secure and affordable accommodation in cities visited. Ready-to-use toilet/shower facility of your own is an advantage for sanitation, kitchen and fridge facility allows you to cook and eat your own meals in the caravan.

Another objective is that; it is also possible to create the ideal caravan for different user groups by adding inner equipment without any change in chassis and structure.

Another objective of the invention is to meet the needs of hunters. Invention will help hunters to access all terrains smoothly, in all conditions (summer & winter) and lodge there. It’s camouflage coating (available in Hunter Type) is compatible with the nature and hunting apparels and equipments. The storage area in the front section of the trailer allows to carry the dogs and hunting supplies easily.

Another objective of the invention is for traveller couples, who love weekend trips or longer city excursions. It is a caravan that can be pulled easily and rapidly by any model of Class B vehicles. Aerodynamic design provides travel safety and considerable fuel economy.

Another objective of the invention is modification for non-land users who won't use the trailer for long journeys. Replacing all terrain tires with tires in smaller sizes will increase the security of the trip; and small volume enables to maneuver in heavy traffic and facilitates easy parking. Another objective of the invention, is to provide a shelter and emergency life support after natural disasters such as earthquakes, landslides that may cause house damages. Anyone who needs a home can have a safe accommodation by the invention which can easily find a place in any parking lot. It is unaffected by external factors; it can adapt to any condition and always ready to use.

Figures for the Description of The Invention

Drawings showing the developed invention are attached, as follows:

Figure 1. Perspective View of the T-Slot Aluminum Profile Main Frame

Figure 2. Bottom View Of The T-Slot Aluminum Profile Main Frame

Figure 3. The Left View Of The T-Slot Aluminum Profile Main Frame

Figure 4. The Rear View Of The T-Slot Aluminum Profile Main Frame

Figure 5. Simulated Perspective View Of The Caravan

Figure 6. Simulated Top View Of the Caravan

Figure 7. Simulated Rear View Of The Caravan

Figure 8. Simulated Side View Of The Caravan

Figure 9. Simulated Perspective View Of The Caravan

Figure 10. Simulated Side View Of The Caravan

Figure 11. Simulation Showing The Main Frame and The Panels Are Attached With The Screws and Acyrlic Double-Sided Adhesive Bandages

Reference Numbers for the Description of The Invention

Parts/components are individually numbered and the corresponding numbers are given below:

1- T-Slot Aluminum Profile Connected with Screws

2- Aluminum Composite Bended Top Panel

3- Aluminum Composite Side Panels

4- Carrier (Main) Chassis

5- Plywood Interior Covering

6- Insulation Layer

7- Screw Connection

8- Acyrlic Double-Sided Adhesive Bandages

C- Caravan Description of The Invention

In this detailed description, subject of the invention a light-weight caravan made from T-slot aluminum profile and it’s structure is explained. That explanation should not cause any limitations, it is just to make the subject clear. Invention is a lightweight caravan made of T- Slot aluminum profile and one of it’s embodiments consist of;

The main frame structure made of T-Slot Aluminum Profile and connected with screws (1 ) that provides light weight, high elasticity, easy montage, removal and attachment feature, strenght against fracture and impact; and the chassis (4) Concave and U-shaped Aluminum composite top panel (2) covers the frame structure (1 ), the front, roof and rear like a case; along with Aluminum Composite Side Panels (3) which cover sides. All aluminum panels and T-slot Aluminum Profiles are pasted to each other with Acyrlic Double-Sided Adhesive Bandages (8) from all contact points (wherever they touch each other) and supported by screw connections (7) that altogether provide additional durability and strength.

Water and moisture resistant Plywood interior covering (5) provides durability and supports the frame while being lightweight insulation layer (6) consisting of siliconized glass wool plate, which provides high heat-sound-humidity insulation between aluminum composite panels that are used in the outer covering (2,3) and interior plywood coverings (5) - Screws(7) and Acyrlic Double-Sided Adhesive Bandages (8) allow mounting aluminum composite panels (2, 3) to the T- Slot Aluminum Profile Frame Structure (1 ) and create high level insulation.

In one embodiment of the invention, the characteristics of the T- Slot profiles used in the chassis and main frame (4,1 ) are preferably;

• 45 mm x 135 mm, moment of inertia L _y 330,6 cm ⁴ and moment of resistance W _y 49 cm ³

• 45 mm x 90 mm, moment of inertia L _y 121 .4 cm ⁴ and moment of resistance W _y 27 cm ³

• 45x45 mm moment of inertia L _y 15,4 cm ⁴ and moment of resistance W _y 6,84 cm ³

In one embodiment of the invention, the chassis (4), is preferably manufactured by various sizes of T-slot aluminum profiles, depending on different loads on different points. In one embodiment of the invention, U-shaped aluminum composite top panel (2) including front, roof and rear panels; preferably has 4,8 kg/mm ² tensile strength, 122 Mpa bending strength, 0,240 kN rn ² /m (4mm) stiffness, and 4 mm thickness.

In one embodiment of the invention, U-shaped aluminum composite top panel (2) including front, roof, rear, and side panels(3); includes polyurethane filling between two thin aluminum layers which provide strength and high level heat insulation, UV resistance and durability against external conditions.

In one embodiment of the invention, the insulation layer -(6) materials are preferably given as follows: In panel (2,3) heat transfer coefficient (Wm ² /K) 5,54 , intermediary filler material 30 mm, the average of thermal conductivity measurements for internal siliconized glass wool coating is 0.035 Wm ² /K at 10°C. The insulation layer - which provides maximum heat and sound insulation (6) consisting of siliconized glass wool filling plates with a thickness of 30 mm; are in the 30 mm gap between plywood interior covering (5) and the panel (2, 3). Total U Value of the wall is 0.934 Wm ² /K.

In one embodiment of the invention, Interior plywood covering (5), preferably consists of, birch plywood / okume marin plywood materials with a thickness of 6 or 8 mm; that provide strenght, lightness, thermal insulation, water and moisture resistance.

In one embodiment of the invention, bottom side of the chassis (4), is preferably covered by a composite panel that provides maximum strength and insulation, 50 mm thick glass wool filling and okume marin plywood.

In one embodiment of the invention, the Caravan (C), preferably includes a diesel fuelled heating system.

In one embodiment of the invention, the Caravan’s (C), total weight is preferably 700-750 kg.

In one embodiment of the invention, the Caravan’s (C) height is preferably 230-235 cm, width is preferably 190 cm, the length of the living room is preferably 310 cm, body length of the Caravan (C) including the front box is preferably 355 cm, total Caravan (C) lenght is 475 cm.

In one embodiment of the invention, the Caravan’s (C) height from the ground is preferably 40-45 cm, the lenght of tail section is preferably 61 cm from the end of the rear tire to the end of the Caravan (C) and 70-75 cm higher than the ground level. In one embodiment of the invention, the Caravan’s (C), internal dimensions are preferably 180 cm wide and 180 cm high which allow an average person to stand up and lay down horizontally in the Caravan (C).

In one embodiment of the invention, the Caravan (C) can easily be pulled without stumbling to the rocks, deep potholes or bumps on the rough terrain, thanks to tail angle of 21 degrees (divergence angle).

In one embodiment of the invention, The Caravan (C) has low wind resistance due to the nose average angle which is 52 degrees from the ground level to the highest point of the roof..

In one embodiment of the invention, the Caravan (C), can easly be towed preferably by a B- Class vehicle or a SUV.

In one embodiment of the invention, the Caravan (C), preferably meets all the personal needs of the users includes those: Kitchen section consisting of a sink, a gas cooker, a mini fridge and a built in heating system; a portable toilet, shower, sitting group and dining table; gas cylinder for the cooker; the fuel tank to provide internal heating for winter use; portable sunshade on the right side of the Caravan to ensure the external use of table; custom design furniture with a“foldable to the wall” Sofa-Bed Mechanism (a bed which can tansform into a seating group); to provide internal and external lightining, invisible led in many locations or visible touch led lighting in the inner section, waterproof and shock-resistant multi-LED lighting at the outer section; fresh water tank, waste water tank and a mini booster pump.

In one embodiment of the invention, the Caravan (C), preferably for the hunters, fisherman and/or skiers, surfers offers a large luggage compartment in the front side that enables to transport the eqipment. In this special storage area there is a copartment for carrying hunting dogs, there are also lockers for rifles and ammunition, hunting supplies, fishing rods and/or skiing, surfing equipments.

In one embodiment of the invention, the Caravan (C), preferably has a side sunshade, bicycle transportation apparatus in the front section, aluminum connecting bars on the ceiling for roof racks, spare wheel and other options. In one embodiment of the invention; any colored camouflage, color, image, a pattern, or PVC foil can be applied to the external surface of the Caravan’s (C), in accordance with wishes, needs or sports that users are interested in. In one embodiment of the invention, preferably advertisement-notice can be applied on the Caravan (C)