INTRODUCTION

Demand of electricity is kept on increasing in every field of our country as well as approximately all other countries. But, approximately all the electricity making projects, who create electricity in traditional way, it is not possible to them to create an electricity with its full capability, due to geographical, natural, technical or any other reasons. And because of this, it is impossible for the concern system/ department to fulfill the increasing demand of electricity. And it adversely affects the productivity of all fields. To tackle with this situation, I have innovational/ discovered a totally different project of electricity making. By using this innovational technology, it will be possible to create electricity in large quantity.

Spatiality of my innovational project of electricity making is that, to create electricity by this project, it does not require resources like water, coal, gas, sun light, air, atomic fuel or any other fuel etc. as required by other projects in vogue. Hence, electricity created under this project, will be a pollution free, sate, profuse and cheap.

Therefore, because of producing electricity in large quantity, it will be helpful for increasing production in agricultural, industrial and all other fields. And government can get success in fulfilling essential needs like food, cloth, shelter and employment of increasing population.

My innovational project of electricity making is named as - "Wheel Weight Pressure Power Project".

My innovational Energy/Power Project namely Wheel Weight Pressure Power Project is safety from any natural calamity and this project is the necessity for the country and the world at large. History before innovation

Before this innovation I had come to know that, demand of electricity is increasing approximately in all the countries in the world. But, due to geographical, natural, technical and many other problems, there is a limitation in creating continuous and uninterrupted electricity by all electricity generation projects till today. And it is adversely affecting the productivity of industrial, agricultural and many other fields.

To get rid of this increasing trouble and to fulfill the increasing demand of electricity, I felt it important to innovation and discover more in electricity generation filed. And I innovated, discovered this totally different, technical electricity making project.

While creating electricity by vogue and traditional projects, one have to face some unavoidable problems and defects. Resources like water, coal, gas, air, sun light, atomic fuel etc. are required in creating electricity by such projects. And for foundation of such projects, huge land is required. Huge amount of water is required in creating electricity by water- electricity projects. Many a times when monsoon does not come in time, at that time, problem of shortage of water gets occurred and work of electricity generation by such water-electricity projects gets stopped. And therefore, it causes to face shortage of electricity. Large amount of heat and carbon get discharged while creating electricity by thermal industry centers. And air, land, water get polluted. And it also causes global warming. It adversely affects every creature and plant. Many a times when such electricity centers do not get water or coal in adequate quantity, at that time, work of making electricity gets reduced or stopped. And therefore, it causes to face shortage of electricity.

To create electricity by gas energy project, it is required to have gas in adequate quantity. Many a times when such energy projects do not get gas in adequate quantity or in cheap rate, work of making electricity gets stopped. As a result, it causes to face shortage of electricity.

Project suitable land is required for establishing solar energy and wind energy projects. And for that purpose, many a times such projects get established on agricultural lands. And due to this, agricultural lands are getting reduced. And there is no fertilization on the land, where such projects get established. And therefore, there can be a shortage of provisions in future. Adequate amount of sun light is required for creating electricity by solar energy project, and if it has not so, then electricity cannot get created by such solar energy projects. And to create electricity with full capacity from wind energy projects, adequate pressure of air is required. And if adequate pressure of air is not gained then, electricity cannot get created with fu|l capacity by such wind energy projects. And it causes to face shortage of electricity.

Atomic fuel is required to create electricity by atomic energy projects and availability of uranium (atomic fuel) is very less in our county. Hence, government has to import atomic fuel from other countries. And therefore, we have to spend state and foreign currency in huge amount. In situation of earth-quake and other natural calamities, such projects are prone to accidents and damages and great disaster can happened. And therefore, out of fear of these disasters, establishment of such projects are opposed highly.

Many countries in the world are running hidden program of atomic growth, under the name of creating electricity by atomic fuel. But actually they do work of making nuclear weapons. If such nuclear weapons get in the hands of terrorists or if such countries if use these nuclear weapons for bad purpose, then entire world will have to face huge disaster. Therefore, such warnings are being given by the experts who are working in this field.

To create electricity in adequate quantity, governments of our country as well as government of other countries give subsidy and other facilities in huge amount to the enterprises for establishing private electricity making projects. But many a times, it seems that, such facilities are being misused also.

Hence, as mentioned above, there are many obstacles and limitations in creating electricity. And it causes to face shortage of electricity. This increasing inadequacy of electricity is adversely affecting every field. And this is how the trouble of shortage of electricity has become global trouble.

To take out India and all other countries in the world from the trouble of electricity, my innovational project of electricity making will be helpful. If electricity generation project gets established as per my innovation, and if work of creating electricity gets started by this project, then thousands and lacks of mega vat electricity will be produced in permanent form and in minimum place. Resources like water, coal, gas, sun light, air, atomic fuel etc. will not be required to create electricity by this project. Hence, electricity created by this project, will be safe and pollution free and inexpensive. This project will always be creating unlimited, uninterrupted and continuous form of electricity. Because, there is no need of water, air, sun light in creating electricity by this project, hence, there will be a saving of water and such saved water will get in used in agriculture and therefore, productivity of provisions will get increased and will help in fulfilling need of food, cloth, shelter of increasing population.

There is no need of coal, gas and atomic fuel or any other fuel to create electricity by this project; hence, 100% state and foreign currency of India as well as all other countries in the world will be saved from spending in excavation or import of such fuels and resources.

There will be a creation of unlimited electricity by this project and this project will be helpful in getting rid of by shortage of electricity and there will not be a need of private projects for creating electricity.

If our government of India as well as government of all other countries in the world propagates this technology then, none of the countries in the world will have to depend on atomic fuel for creating electricity and none of them will get chance to make nuclear weapons under the name of electricity making. And this is how the technology of this project Will help in solving the global problem of shortage of electricity. Description

(Wheel weight pressure power project)

Equipments/ land needed for the project

The diagram of the equipment necessary for establishing the project and how the project shall be executed is given in figure at page no. 14 & 15 of the document.

1) 800 turbines producing electricity having capacity of 10 megawatt each turbine. (Turbine means electricity producing generator)

2) Iron track measuring 4 km. in length and 5 mt. in breadth.

3) To speed the rotation of the main excel of the turbine a gear wheel of 5ft height based on specialized technology (800 number).

4) Rods measuring 25 ft. in length for revolving gear wheel attached with shaft of the turbine (800 number).

5) Bearings and axles of appropriate measurement. ^'

6) 5 meter length, ½ feet width and ½ feet height pressure rod (400 number).

7) Spring of 15 ft. length and 1 meter breadth that can bear weight of 5 tons (400 number).

8) 392 wheel weights of 7 ton weight measuring 5 meter length and 5 meter breadth.

9) 8 wheel weight electric engines weighting 7 ton and measuring 5 meter length and 5 meter breadth which are controlled by the help of automatic computer. (This engines run on electricity supplied from overhead wire and will be controlled by computer from control room. Every engine runs on electricity supply of 1.5 kv).

10) 4 km. long overhead wire supplying 12 kv. Electricity

11 ) Control room.

12) Rod that rotates the wheel and pushes the rod back and forth. (1600 number).

13) Transformer with necessary capacity for electricity supply (800 numbers). This project shall be installed as follows:-

(Wheel weight pressure power projector should be installed as per diagram shown on Page No.14 & 15)

1) The iron bridge of 4 km length and 10 mtrs width shall be constructed at open land on the 5 km dia.

2) Over the bridge two iron tracks separating 5 meters in circular shape and 4 km long iron track to be placed on it.

3) Beneath the iron tracks on both sides two turbines be placed at a safe distance. (5 meter width and 4 km long track should be kept at the center and both sides of the land shall have track of length 10 meter and 50 meter width). .

4) To establish a turbine both sides of 20 meter land is required and 20 meters of land is required for installing the other turbine and its transformer. Thus in one part of 10x50 mt. two turbines and two transformers shall be installed.

5) 4 km. long track shall divided into 400 parts and in those 400 parts 800 and 800 transformers are to be installed.

6) On one side of the iron track pressure rod shall be attached (pressure rod 5 meter length and 5 ft. in height).

7) The bearing and axles shall be attached to the pointed track. Between two pressure rods there shall be space of 5 meters. 8) To connect this gear wheel of 5 ft. height with main excel of electricity producing turbine.

9) The pressure rods at other end should be attached to spring of length 15 ft. There should be 10 ft. high foundation below the spring and the lower part has to be fixed and the pointed track should be 5 ft. above. The back part has to be fixed with the track.

10) The pointed spring attached to the gear wheel should be fixed to that part.

1 ) When due to pressure of the wheel weight the rod moves up and down then there shall be a rod to pull and to push that rod thus for 800 rods there shall be 1600 such rods.

12) 4 km. long circular track shall have 49 wheel weight and after that one electric engine shall be attached. Thus 400 wheel weight circular shall comprise 4 km. long chain. 3 To rotate the chain of the electric wheel weight engines for power supply wheel weight chain 4 km. long chain over head wire shall be installed.

14) To control the wheel weight chain a control room with modern equipment shall be established.

Description and operative procedures of my innovation Wheel weight pressure power project:

This project for electricity generation shall operate as describe below. After the project work is completed the electricity shall be generated as mentioned herein below: It shown on diagram on Pg. N0.14 & 15.

1) After receiving electricity from the overhead through 8 electricity wheels weight engines is started and thereafter all the engines shall started from the control room.

2) After the wheel weight engines are started the 4 km. long wheel weight chain moves at a speed of 30 km./ hr. on the track circularly.

3) This wheel weight exerts pressure over the rod and one wheel weight takes 1.2 seconds to pass over one pressure rod.

4) When every wheel weight exerts it pressure towards ground and moves through tracks then the gear wheel exerts its pressure downwards then the rear handle rod moves and the gear wheel moves with the rod clockwise for half a round which would put pressure on the spring attached to the pressure rod whereby the spring is released.

5) When the underweight pressure rod moves away from the first wheel weight and before the second wheel weight pressure rod arrives in the 0.60 seconds period upwards and then the rod attached moves for 1.2 seconds after being pressured downwards then the gear wheel shall complete one full round and this process continues.

6) Thus the 4 km. integrated wheel weight chain moves 30 km. per hour at normal and safe speed, then ih one minute 50 wheel weight passes and in one minute the gear wheel completes 50 round and the turbines main shaft moves 4 times faster. And thus electricity is generated to its full capacity through all turbines. (The main excel of the wind mill turbines moves 22 to 25 rounds in a one minute in full air pressure and comparatively the velocity of the main excel of the turbines in wheel weight pressure power project's is definitely many times more).

7) To start engine of the wheel weight chain 12 kv. External electricity is required for one time only, (for a single engine 1.5 kv. And for 8 engines 12 kv. electricity is required), when the wheel weight chain moves 30 km. per hour at normal and safe speed on the integrated circular track then every turbine generates 10 mw. of electricity. 10 mega watts of electricity is generated and 800 turbines produce 8000 mega watts of electricity (in a limited area and in a short of space, probably no electricity project in any country of the world generates electricity at such a huge scale) and that will be a great project.

8) Thereafter with the help of engines controlled the self-generated electricity keeps it rotating. And forever optimum capacity of 8000 mega watts of electricity will be generated with the help of 12 kv electricity.

9) Thus, when electricity is generated then the need for external electricity does not arises and the electricity generated is safe and nonstop and the project is completely safe and secure.

10) In this project for the production of electricity in one of its part 4 turbines also can be used instead of 2 turbines and thus number of turbines thereby producing 16000 mega watt of power instead of 8000 mega watts.

11 ) If the capacity has to be enhanced then turbines got to be increased and the weight of wheel weight arid capacity of engines got to be increased and accordingly equipments will need to be changed. 12) If more electricity needs to be generated then the project can be extended to 5 floors and every floor shall have 1600 turbines thus v5 floors in total shall have 8000 turbines and out of 8000 turbines 80,000 mega watts of electricity can be generated.

13) If the capacity needs to be enhanced then 5 floors three separate 24,000 turbines can be installed and 2,40,000 mega watts electricity can be generated. Thus more the turbines more the electricity will be generated.

14) When this project is completed and started generating electricity then maintenance costs and labor and very less other cost towards production will incurred.

Thus the innovated project of mine is totally safe and incorporates modern technology. This is the only one of its kind of project anywhere in the world. The electricity generated is safe, continuous, long lasting and pollution free.