| Document |
Document Title |
|
JP2003090986A |
To provide rimless spectacles which can have its decoration component easily detached and its decoration replaced at proper time as the user likes and make it possible to stably connect lenses.The lens fitting member for the rimless spec...
|
|
JP2003084238A |
To provide rimless spectacles which are light in weight and durable by fixing tools which eliminate brazing points to the lens fixing tools (3) of the rimless spectacles, eliminate the anxiety about strength, are easily adjustable and ar...
|
|
JP2003084240A |
To provide rimless spectacles which facilitate the fastening of lenses and surely hold the lenses.The lens can be surely fastened by parallel opening a screw insertion hole 3 and an insertion hole 2 of an L-shaped pin 7 at a temple 1, in...
|
|
JP2003075780A |
To provide a mounting structure for upper and lower eyewire locks and a frame member which is capable of easily and safely attaching and detaching the eyewire locks and the frame member.The mounting structure for the upper and lower eyew...
|
|
JP2003075781A |
To provide spectacles which has means for automatically regulating the angles of lenses in looking up and viewing near and viewing far, prevents the occurrence of a deviation in the central points of the lenses and errors in the angles w...
|
|
JP2003075779A |
To provide a fingertip pinup mechanism for spectacle lenses which is simple in structure without requiring an intricate structure, enables a user to pin up the spectacle lenses with a fingertip operation and is neat in terms of design.An...
|
|
JP2003066380A |
To provide screwless spectacles which do not require screwing work and brazing work at all, can be simply and rapidly assembled and can impart a feel of wearing comfortable for a long period to a wearing person.A spectacle front which sy...
|
|
JP2003066378A |
To provide rimless spectacles with which the adjustment of the distance between lenses can be performed by adjustment of only the lens segments without changing a temple width.The rimless spectacles are composed of respective parts; temp...
|
|
JP2003057603A |
To provide a connection structure in glasses in which an endpiece and a bridge member are not loosen over a long time when the endpiece and the bridge member are attached to the glasses. A connection member having a cylindrical part loca...
|
|
JP3381160B2 |
|
|
JP2003043423A |
To provide a spectacles which allows even an amateur to perform attachment and removal of lens easily, applies no unreasonable stress to the lens and prevents lens breakage. The lens 1 is directly attached to a transition 2 which is disp...
|
|
JP2003043421A |
To provide rimless spectacles which allows reduction of production loss due to an error in lens drilling operation and prevents damage of lens due to the error. The rimless spectacles 10 comprise lenses 12, endpieces 18 and connecting me...
|
|
JP2003028126A |
To block relative movement between a screw and fastened objects, and prevent generation of play between the fastened objects over a long period.This screw fastening body is used for a spectacle frame and fastens the frame and a lens. The...
|
|
JP2003021809A |
To provide a spectacle frame with lenses easily exchangeable only by the manual work without using tools at all.Eyewires 1 of spectacles are formed of annular segments 4 formed to a shape of holding outer edges 3 of lenses 2 for the purp...
|
|
JP2003021808A |
To provide a stable lens holding mechanism of rimless spectacles which is extremely stable in the holding state of lenses and can simplify its structure.This mechanism includes at least a pair of right and left lenses 3 which are pierced...
|
|
JP2003502711A |
An off-axis optical display system is provided. The system comprises an eyeglass lens assembly having a first lens section having a first surface, at least a portion of the first surface having a first curvature, and a second lens sectio...
|
|
JP3368424B2 |
To make it possible to stably mount wraparound endpieces without shaking and without problems even with unbrazeable materials, such as aluminum alloys, by fitting projecting parts into the recessed parts of large endpieces, screwing the ...
|
|
JP2003015088A |
To provide spectacles of a structure to permit combination of spectacle frames and endpieces formed of different materials in various variations.The spectacles 10 include eyewires 16 and a pair of separating brackets 26 which are dispose...
|
|
JP3367611B2 |
A glasses' front frame having a V-shaped groove (5) which receives a locking ledge stripe (1c), having a V-shaped cross section, around a circumference of a lens. There are formed a first frictional biting-into protrusion stripe (6a) and...
|
|
JP2003005133A |
To facilitate the exchange of filament members and to make appearance smart and beautiful.The wire frame has the 'wire rim which has right and left lens holding sections (1) and a bridge section (2) for connecting these sections and is c...
|
|
JP3358656B2 |
To position and fix a drilling jig in order to process a nonpenetrating hole directing to the lens inner side from the end face of an eyeglass lens which is edging process, securely in a simple device and in a simple operation. While the...
|
|
JP3356722B2 |
|
|
JP3356787B2 |
To provide a closing block of the frame wherein the lens can be tightly fixed to the rim without rattling and the installing/removing of the lens can be easily operated even if the process precision of the outer shape of the lens is wors...
|
|
JP2002357793A |
To provide simplify assembly and to facilitate mounting of lenses. The segments existing on the upper sides of the grooves on the outer peripheral surfaces of lens frames 2 are provided with frame bodies 6 in tight contact therewith. Plu...
|
|
JP2002357792A |
To prevent lenses and fastening parts of two-point spectacles from turning with each other by simple structure. This structure is formed by providing the apertures on the fastening part insertion side of through-holes of lens ends with c...
|
|
JP2002357790A |
To provide rimless spectacles which are formed by attaching top rims formed with both lenses at a browbar and foldably attaching temples across joints to wraparound endpieces and do not give rise to fissure and crack at the lenses by acc...
|
|
JP2002357791A |
To provide rimless spectacles which are formed by connecting both lenses by means of connecting members, mounting the outer sides of the lenses with wraparound endpieces and foldably attaching temples by means of joints to the wraparound...
|
|
JP2002341295A |
To easily manufacture rimless spectacles of a type to support lenses by means of cords and attach the same to rim frames with low cost.This spectacle device has wire-shaped rim frame members 7 which are formed by curving a piece of metal...
|
|
JP2002341293A |
To provide bushings for fastening which are capable of preventing co-rotating of lenses and fastening parts of two-point spectacles by using simple parts and are usable without using special tools even in a retail store.The bushing for f...
|
|
JP2002341292A |
To provide wearing-on-single ear type spectacles which can be worn on the single ear aloe without using spectacles for both eyes and are capable of easily correcting visual acuity.The spectacles are formed by attaching an arm (3) provide...
|
|
JP2002341294A |
To provide a spectacle type frame of a full-rim type with which such an atmosphere where there is no frame or an atmosphere where the frame is embedded within lenses.The frames 2 are composed of upper frames 3 and lower frames 7 and the ...
|
|
JP2002540456A |
Eyeglasses for use in applying makeup includes an adjustable length nosepiece extension which sets the lenses a distance sufficiently spaced from the face to permit the application of makeup including fingers and implements to the eye an...
|
|
JP2002539493A |
(57) [Summary] The present invention may be used in the medical field, or more precisely in the field of ophthalmology, to treat and prevent progressive myopia and to reduce regulatory stress in patients suffering from progressive myopia...
|
|
JP2002328345A |
To obtain a device for drilling lens, capable of forming a through hole at an exact point even with an unskilful person.A sample lens 130 is mounted on the lens fixing tool 70 of the device for drilling lens 50. The position of the sampl...
|
|
JP2002323029A |
To prevent play of fastened matter from occurring by restraining a screw from getting loose.A bolt 7 is made to penetrate through the fastened matters 5 and 5 and a nut 9 is fastened via a washer 1 to a portion of the bolt 7 protruded fr...
|
|
JP2002323679A |
To provide clamping structures for securely clamping spectacle lenses to spectacle frame parts without damaging the lenses.A tapered nut 10 having a conical tapered part 12 and a collar 11 are fitted into a hole 42 of a mortar shape bore...
|
|
JP2002318372A |
To provide a practicable lens fastening mechanism of rimless spectacles which is extremely stable in the holding state of lenses and is capable of simplifying its structure.The following technical means are adopted: Fastening pins crooke...
|
|
JP2002536684A |
This invention refers to a way of producing frames for glasses of different types but all with the characteristic of lacking in weldings and in the hinge that normally joints the frontal with the bars since such a purpose has been absolv...
|
|
JP2002311394A |
To prevent spectacle temples from being opened more than needed and from being made no longer fittable to the face.The spectacle temple 4 has a coupling 4a which is freely turnably screwed to a first coupling 3a of an endpiece 3 and a sl...
|
|
JP2002311390A |
To provide spectacle parts made of resins which are the parts of injection molded spectacle frames and are capable of supplying the influence of the electromagnetic waves generated from electronic apparatus, such as computers and cellula...
|
|
JP2002311393A |
To prevent the front parts of spectacles from lowering.The spectacles are formed by fitting a pair of lenses to a pair of frames coupled by a bridge, providing the inner side with a pair of nose pads and providing the outer side with a p...
|
|
JP2002303834A |
To obtain a lens boring method which enables even an unskilled person to form a through hole in a lens at an accurate position.A sample lens 130 is fixed on a boring device 50. A fixed rod 120 is run through the through hole formed in th...
|
|
JP2002303833A |
To provide an evaluation apparatus and evaluation method which are capable of evaluating the strength of a lens when the lens is subjected to two-point processing.The strength of the lens is evaluated by using the evaluation apparatus fo...
|
|
JP2002303827A |
To provide a lens mounting structure for rimless spectacles which does not limit the field of vision when a user wears the spectacles, can more securely hold and fix lenses, is excellent in safety and does not substantially hinder cleani...
|
|
JP3088718U |
[Task] We provide glasses that allow you to freely replace the front part of the glasses and are not heavy like apron type glasses and flip-up type glasses. On both sides of the wading of the glasses, it consists of a frame 2 with vines ...
|
|
JP2002277835A |
To provide spectacles, capable of preventing snapping of temples at the skin by eliminating the excessive pressurized contact force to the flanks of the face.The method of reducing the contact pressure of the temples 1 with the flanks of...
|
|
JP2002277830A |
To provide a spectacle frame, which has the function to enable a user to make up his eyelids and parts around the eyes with spectacles on and has nice appearance at the time of ordinary use and is superior in design and safety.The specta...
|
|
JP2002531872A |
A spectacle frame assembly comprises a primary spectacle frame ( 100 ) and an auxiliary spectacle frame ( 200 ). The primary and secondary spectacle frames ( 100, 200 ) each have a pair of rims ( 113, 213 ) for receiving a pair of lenses...
|
|
JP2002258217A |
To prevent play of eyeglasses.Locking screws 14 are inserted between a lens 23 and a bridge 2, and between the lens 23 and an armor 6. The locking screws 14 are fastened by nuts 18. Washers 19 are put between the locking screw 14 and the...
|
|
JP2002244083A |
To propose a connecting method which provides a structure permitting the free replacement of the parts of a spectacle frame and permits the easy exchange of the parts and to provide a connecting structure which does not give rise to shak...
|
